ДСТУ EN 60618:2015 Делители напряжения индуктивные. Общие технические требования (EN 60618:1997, IDT). С Изменением № 2

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ДСТУ EN 60618:2015
(EN 60618:1997, IDT)

Подільники напруги індуктивні. Загальні технічні вимоги

 

 
   
 
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

 

ДСТУ EN 60618:2015
(EN 60618:1997/А2:1997, IDT). Зміна № 2:2015

Подільники напруги індуктивні. Загальні технічні вимоги

 

 
   
 
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

1 Scope

2 Terms and definitions

2.1 Inductive voltage divider

2.2 Transfer ratio

2.3 Fiducial value

2.4 Transfer ratio error

2.5 Input impedance

2.6 Output impedance

2.7 Influence quantity

2.8 Variation

2.9 Reference conditions

2.10 Nominal range of use

2.11 Limiting values of an influence quantity

2.12 Circuit insulation voltage (nominal circuit voltage)

2.13 Common mode voltage

2.14 D.C. series mode input current

2.15 Distortion factor

2.16 Electrostatic screen

2.17 Leakage current screen

2.18 Resolution

2.19 Auxiliary equipment

2.20 Accuracy

3 Classification

4 Limits of intrinsic error

4.1 Permissible limits of intrinsic error

4.2 Selectable ratios

5 Conditions for the determination of intrinsic errors

6 Permissible variations

6.1 Limits of variations

6.2 Conditions for the determination of the variations

6.3 Variation due to d.c. series mode current

6.4 Variation due to the influence of an externally produced magnetic field

7 Additional electrical and mechanical requirements

7.1 Limiting values of input voltage

7.2 Input voltage switching

7.3 Voltage test and other safety requirements

7.4 Insulation resistance test

7.5 Limiting conditions for storage, transport and use

8 Information, markings and symbols

8.1 Information

8.2 Markings, symbols and their locations

8.3 Documentation

8.4 Example of the marking of an IVD

Appendix A Transfer ratio and other performance characteristics

Annex ZA (normative) Normative references to international publications with their corresponding European publications

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online