ДСТУ EN ІSO 14555:2019 Сварка. Дуговая приварка шпилек из металлических материалов (EN ISO 14555:2017, IDT; ISO 14555:2017, IDT)

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(   
(ДП «УкрНДНЦ»))

Наказ від 04.10.2019 № 307

EN ISO 14555:2017

Welding —
Arc stud welding of metallic materials
(ISO 14555:2017)

прийнято як національний стандарт
методом «підтвердження» за позначенням
 

ДСТУ EN ІSO 14555:2019
(EN ISO 14555:2017, IDT; ISO 14555:2017, IDT)

Зварювання. Дугове приварювання
шпильок з металевих матеріалів

З наданням чинності від 2019–11–01

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and abbreviated terms

4.1 Symbols

4.2 Abbreviated terms

5 Technical review

6 Welding personnel

6.1 Stud-welding operators

6.2 Welding coordination

7 Equipment

7.1 Production equipment

7.2 Description of the equipment

7.3 Maintenance

8 Production planning

9 Welding procedure specification (WPS)

9.1 General

9.2 Information related to the manufacturer

9.3 Information related to the parent material

9.4 Welding process

9.5 Joint

9.6 Studs

9.7 Auxiliaries

9.8 Power source

9.9 Movable fixtures

9.10 Welding variables

9.11 Thermal conditions

9.12 Post-weld heat-treatment

9.13 Non-thermal treatment after welding

10 Welding procedure qualification

10.1 Principles

10.2 Welding procedure tests

10.3 Pre-production tests

10.4 Previous experience

10.5 Welding procedure qualification record (WPQR)

11 Examination and testing

11.1 General

11.2 Visual examination

11.3 Bend testing

11.4 Tensile testing

11.5 Torque test

11.6 Macro examination

11.7 Radiographic examination

11.8 Ring test

12 Acceptance criteria

12.1 General

12.2 Acceptance criteria for visual examination

12.3 Acceptance criteria for bend testing

12.4 Acceptance criteria for tensile testing

12.5 Acceptance criteria for torque testing

12.6 Acceptance criteria for macro examination

12.7 Acceptance criteria for radiographic examination

12.8 Acceptance criteria for ring tests

12.9 Acceptance criteria for additional tests

13 Workmanship

14 Process control

14.1 General

14.2 Production test

14.3 Simplified production test

14.4 Re-testing for production test or simplified production test

14.5 Production surveillance

14.6 Production surveillance record

14.7 Non-conformance and corrective actions

14.8 Calibration of the measuring and testing equipment

Annex A (informative) Processing of stud welding

Annex B (normative) Quality requirements for stud welding

Annex C (informative) Manufacturer’s welding procedure specification (WPS)

Annex D (informative) Welding procedure qualification record form (WPQR) (for drawn-arc stud welding with ceramic ferrule or shielding gas and short-cycle drawn-arc stud welding)

Annex E (informative) Welding procedure qualification record form (WPQR) (for capacitor discharge stud welding with tip ignition and capacitor discharge drawn-arc stud welding)

Annex F (informative) Test results — Production test (for drawn-arc stud welding with ceramic ferrule or shielding gas and short-cycle drawn-arc stud welding)

Annex G (informative) Test results — Production test (for capacitor discharge stud welding with tip ignition and capacitor discharge drawn-arc stud welding)

Annex H (informative) Example of production surveillance record

Bibliography