ДСТУ EN 62080:2014 Приборы звуковой сигнализации для бытовых и подобных целей (EN 62080:2009, IDT)



ДСТУ EN 62080:2014
(EN 62080:2009, IDT)

Прилади звукової сигналізації для побутових та подібних цілей

 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Forewords

1 Scope

2 Normative references

3 Definitions

4 General requirements

5 General notes on tests

6 Classification

7 Marking

8 Protection against electric shock

9 Constructional requirements

10 Normal operation

11 Temperature rise

12 Abnormal conditions

13 Resistance to ageing, protection against ingress of solid objects and against harmful ingress of water and to humidity

14 Insulation resistance and dielectric strength

15 Mechanical strength

16 Resistance to heat

17 Internal wiring

18 Components

19 Terminals

20 Flexible cables and their connection

21 Provision for earthing

22 Screws, current-carrying parts and connections

23 Creepage distances and clearances

24 Resistance of insulating material to abnormal heat and to fire

25 Resistance to rusting

26 EMC requirements

Annex A (normative) Electronic devices

Annex B (normative) EMC requirements

Annex C (normative) Measurement of creepage distances and clearances

Figure 1 — Examples of different types of screws

Figure 2 — Standard test finger

Figure 3 — Arrangement for test on covers or cover-plates

Figure 4 — Gauge (thickness: about 2 mm) for the verification of the outline of covers and cover-plates

Figure 5 — Examples of application of the gauge of figure 4 on covers screwlessly fixed on a mounting surface or supporting surface

Figure 6 — Examples of application of the gauge of figure 4 in accordance with the requirements

Figure 7 — Void

Figure 8 — Sketch showing the direction of application of the gauge of figure 7

Figure 9 — Ball-pressure apparatus

Figure 10 — Flexing test apparatus

Figure 11 — Test pins

Figure 12 — Test wall

Figure 13 — Diagrammatic representation

Table 1 — Force to be applied to covers, cover-plates, or actuating members whose fixing are not dependent on screws

Table 2 — Torque to be applied to screws and connections

Table 3 — Values of maximum temperature rise

Table 4 — Temperature limits

Table 5 — Minimum values of insulation resistance for additive insulation protected devices and earth protected devices

Table 6 — Minimum values of insulation resistance for installation protected devices

Table 7a — Test voltages for devices having a rated voltage not exceeding 130 V

Table 7b — Test voltages for devices having a rated voltage exceeding 130 V

Table 8 — Test voltages

Table 9 — Pull force on pins

Table 10 — Torques for verification of the mechanical resistance of the screwed glands

Table 11 — Pull force and torque

Table 12 — Minimum clearances

Table 13a — Creepage distances of basic and supplementary insulation

Table 13b — Creepage distances of reinforced insulation

Table B.1 — Tests requirements and levels according to the family of the device