ДСТУ EN 14351-2:2022 Окна и двери. Стандарт продукта, свойства производительности. Часть 2. Межкомнатные двери (EN 14351-2:2018, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ДСТУ EN 14351-2:2022
(EN 14351-2:2018, IDT)

Вікна та двері. Стандарт продукту, характеристики продуктивності.
Частина 2. Міжкімнатні двері

 

 
   
 
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

1 Scope

2 Normative references

3 Terms, definitions and symbols

3.1 Terms and definitions

3.2 Symbols

4 Product characteristics

4.1 General

4.2 Release of dangerous substances (only for emissions into indoor air impact) (for intended use a, b and c)

4.3 Impact resistance (where relevant, only for glazed doors with injury risks) (for intended use a, b and c)

4.4 Height (for intended use a, b and c)

4.5 Reaction to fire

4.6 Direct airborne sound insulation index (only for uses where acoustic performance is required) (for intended use b)

4.7 Operating forces (only for automatic devices and only for internal landing communication doors and doors for special uses and specific requirements) (for intended use b)

4.8 Thermal transmittance (only for uses where thermal insulation performance is required) (for intended use b)

4.9 Air permeability (only for uses where air permeability performance is required for specific use with specific requirements) (for intended use b)

4.10 Ability to release (to open) (only for locked doors in escape routes) (for intended use a)

4.11 Durability

4.12 Width

4.13 Manual operating forces

4.14 Mechanical strength

4.15 Bullet resistance

4.16 Explosion resistance

4.17 Resistance to repeated opening and closing

4.18 Behaviour between two different climates

4.19 Burglar resistance

4.20 Safety requirements for power operated pedestrian hinged doorsets

4.21 Ventilation

5 Testing, assessment and sampling methods

5.1 General

5.2 Dangerous substances

5.3 Impact resistance (only for glazed doors with injury risk) (for intended use a, b and c)

5.4 Height (for intended use a, b and c)

5.5 Reaction to fire

5.6 Direct airborne sound insulation index (only for uses where acoustic performance is required) (for intended use b)

5.7 Operating forces (only for automatic devices and only for internal landing communication doors and doors for special uses) (for intended use b)

5.8 Thermal transmittance (only for uses where thermal insulation performance is required) (for intended use b)

5.9 Air permeability (only for uses where air permeability performance is required for specific use with specific requirements) (for intended use b)

5.10 Ability to release (to open) (only for locked doors in escape routes) (for intended use a)

5.11 Durability

5.12 Width

5.13 Manual operating forces

5.14 Mechanical strength

5.15 Bullet resistance

5.16 Explosion resistance

5.17 Resistance to repeated opening and closing

5.18 Behaviour between two different climates

5.19 Burglar resistance

5.20 Safety requirements for power operated pedestrian hinged doorsets

5.21 Ventilation

6 Assessment and verification of constancy of performance - AVCP

6.1 General

6.2 Type testing

6.3 Factory production control (FPC)

7 Marking, Labelling and packaging

Annex A (informative) Product characteristics possibly affected by change of components

Annex B (normative) Tabulated values and extension of test results following size and design variations

Annex C (informative) Example of performance and requirement profile of an Internal pedestrian doorsets

Annex D (informative) Examples for opening dimensions of internal pedestrian doorsets

Annex E (informative) Handling, installation, maintenance and care

Annex F (normative) Selection, preparation, mounting and fixing of test sample(s) for reaction to fire tests and field of direct application

Annex ZA (informative) Relationship of this European Standard with Regulation (EU) №.305/2011

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online