ДСТУ EN 60870-6-503:2022 Пристрої та системи телекерування. Частина 6-503. Протоколи телекерування, сумісні зі стандартами ISO та рекомендаціями. Послуги та протокол TASE.2 (EN 60870-6-503:2014, IDT; IEC 6087...

ДСТУ EN 60870-6-503:2022
(EN 60870-6-503:2014, IDT; IEC 60870-6-503:2014, IDT)

 Пристрої та системи телекерування. Частина 6-503. Протоколи телекерування,
сумісні зі стандартами ISO та рекомендаціями. Послуги та протокол TASE.2

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

INTRODUCTION

1 Scope

1.1 General

1.2 Control centre

1.3 Architecture

1.4 Network Model

1.5 Relation between TASE.2 and MMS

2 Normative references

3 Terms and definitions

4 Abbreviations

5 TASE.2 Model

5.1 General

5.2 Informal TASE.2 Model Description

5.2.1 General

5.2.2 Associations

5.2.3 Bilateral agreements, bilateral tables and access control

5.2.4 Data Value objects and services

5.2.5 Data Set objects and services

5.2.6 Account Objects and Services

5.2.7 Information Message object and services

5.2.8 Transfer Set objects and services

5.2.9 Common Data Transfer mechanisms

5.2.10 Special Transfer objects and services

5.2.11 Device objects and services

5.2.12 Program objects and services

5.2.13 Event Enrollment objects and services

5.2.14 Event Condition objects and services

5.3 Formal TASE.2 model description

5.3.1 General

5.3.2 General access control requirements

5.3.3 Association management

5.3.4 Bilateral Tables

5.3.5 List of Access Control Specification

5.3.6 Data values

5.3.7 DataSets

5.3.8 Accounts

5.3.9 Information Messages

5.3.10 Transfer Sets

5.3.11 Special Transfer objects

5.3.12 Devices

5.3.13 Programs

5.3.14 Event Enrollments

5.3.15 Event Conditions

6 Mapping of TASE.2 Object Models onto MMS Object Models

6.1 General

6.2 Object modelling notation

6.3 The virtual control centre (VCC)

6.3.1 General

6.3.2 TASE.2 Domain mapping

6.3.3 TASE.2 Control Centre mapping

6.3.4 OSI Application Processes, Application Entities and Addressing

6.4 Association object model mapping

6.5 Bilateral Table object model mapping

6.6 Data Value object model mapping

6.7 Data Set object model mapping

6.8 Information Message object model mapping

6.9 Transfer Set object model mapping

6.9.1 General

6.9.2 Data Set Transfer Set object model mapping

6.9.3 Information Message Transfer Set object model mapping

6.10 Next Transfer Set object model mapping

6.11 Transfer Set Name object model mapping

6.12 Conditions object model mapping

6.13 Event Code object model mapping

6.14 Transfer Set Time Stamp object model mapping

6.15 Device object model mapping

7 Mapping of TASE.2 operations and actions onto MMS services

7.1 General

7.2 Use of MMS services

7.2.1 General

7.2.2 Association Management Mapping to MMS

7.2.3 Data Value operations mapping to MMS

7.2.4 Data Set operations mapping to MMS

7.2.5 Transfer Set operations and actions mapping to MMS

7.2.6 Device operations and actions mapping to MMS

7.2.7 Summary of TASE.2 operations

8 Standardized Application-specific objects

8.1 General

8.2 Named Type objects

8.2.1 General

8.2.2 Visible-String-32 Type

8.2.3 MMS ObjectName

8.2.4 Time Stamp Types

8.2.5 TimeStampExtended Type

8.2.6 Time Interval Types

8.2.7 TransferSet Types

8.2.8 Conditions Types

8.2.9 SupportedFeatures Type

8.2.10 TASE.2Version Type

8.3 Named Variable Objects

8.3.1 General

8.3.2 "Supported_Features"

8.3.3 ”Bilateral_Table_ID"

8.3.4 "TASE.2 Version"

8.3.5 Data Value objects

8.3.6 Transfer Set objects

8.3.7 "Next_DSTransfer_Set"

8.3.8 ”Transfer_Set_Name"

8.3.9 "IM_Transfer_Set"

8.3.10 "DSConditions_Detected"

8.3.11 ”Transfer_Set_Time_Stamp’’

8.3.12 "Transfer_Report_ACK"

8.3.13 ”Transfer_Report_NACK”

8.4 Named Variable List objects

8.5 Information Message objects

9 Use cases for semantic integration with IEC 61970

9.1 General

9.2 Use Case 1: Determining what Measurement/MeasurementValues are available

9.2.1 General

9.2.2 Use Case 1a: Determining information associated to equipment

9.2.3 Use Case 1b: Determining Measurement information for non-equipment related measurements

9.3 Use Case 2: Exchange of Bilateral Table information

10 Bilateral Table semantic model

10.1 General

10.2 IEC 61970-452 Classes

10.2.1 Command

10.2.2 Control

10.2.3 IdentifiedObject

10.2.4 DiscreteCommand

10.2.5 Measurementvalue

10.2.6 Setpoint

10.3 ICCP Specific Classes

10.3.1 ICCPAccessPoint

10.3.2 ICCPCommandPoint

10.3.3 ICCPControlPoint

10.3.4 ICCP Indicationpoint

10.3.5 ICCPInformationMessage

10.3.6 ICCPPoint

10.3.7 ICCPSetPoint

10.3.8 ISOAPAddress

10.3.9 ISOUpperLayer

10.3.10 TASE2BilateralTable

10.3.11 TCP_AccessPoint

10.3.12 Enumerations

11 Conformance

Annex A (normative) TASE.2 Operations and actions summary

Annex B (informative) Quality of Service (QOS), Routing and Priority

B.1 General

B.2 Background

B.3 TASE.2 Requirements

B.3.1 General

B.3.2 Transport layer

B.4 Network layer

Annex C (informative) TASE.2 Operations and actions summary

Annex D (informative) TASE.2 (2002) Additional Model Elements

D.1 General

D.2 Informal TASE.2 Model Description

D.2.1 General

D.2.2 Bilateral Agreements, Bilateral Tables end access control

D.2.3 Account objects and services

D.2.4 Program objects and services

D.2.5 Event Enrollment objects and services

D.2.6 Event Condition objects and services

D.3 Formal TASE.2 Model description

D.3.1 General

D.3.2 Accounts

D.3.3 Accounts models

D.3.4 Transfer Sets

D.3.5 Transfer Account Transfer Set object model

D.3.6 Information Message Transfer Set object model

D.3.7 Special Transfer Sets

D.3.8 Programs

D.3.9 Event Enrollments

D.3.10 Event Conditions

Annex E (informative) Mapping of TASE.2 (2002) object models onto MMS object models

E.1 General

E.2 Bilateral Table object model mapping

E.3 Time Series Transfer Set object model mapping

E.3.1 General

E.3.2 TSTransmissionPars Object Model Mapping

E.4 Account Object Model Mapping

E.5 Transfer Set Object Model Mapping

E.5.1 Transfer Account Transfer Set Object Model Mapping

E.5.2 TATransmissionPars Object Model Mapping

E.6 Program Object Model Mapping

E.7 Event Enrollment Object Model Mapping

E.8 Conditions Object Model Mapping

E.8.1 General

E.8.2 Event Condition Object Model Mapping

Annex F (informative) Mapping of TASE.2 (2002) Operations and Actions onto MMS Services

F.1 General

F.2 Use of MMS Services

F.2.1 Association Management Mapping

F.2.2 Transfer Set Operation and Action Mapping

F.2.3 Condition Monitoring Mapping

F.2.4 Get Next TSTransfer Set Value Operation Mapping

F.2.5 Account Operations and Actions Mapping

F.2.6 Query Mapping

F.2.7 Program Operations Mapping to MMS

F.2.8 Event Enrollment Operations Mapping to MMS

F.2.9 Event Condition Actions Mapping onto MMS - Event Notification Action Mapping

F.2.10 Summary of TASE.2 Operations

Annex G (informative) TASE.2 (2002) Standardized Application-specific Objects

G.1 General

G.2 Named Type Objects

G.2.1 General

G.2.2 TransferSet Types

G.2.3 SupportedFeatures Type

G.2.4 Conditions Types

G.3 Named Variable Objects

G.3.1 General

G.3.2 "Next_TSTransfer_Set"

G.3.3 "TSConditions_Detected”

G.3.4 "TA_Transfer_Set"

G.3.5 "TAConditions_Detected"

G.3.6 "Event_Code_Detected"

G.3.7 Information Message Objects

G.4 Event Condition Objects