ДСТУ EN IEC 62368-1:2022 Обладнання аудіо/відео, інформаційних та комунікаційних технологій. Частина 1. Вимоги щодо безпеки (EN IEC 62368-1:2020, IDT; IEC 62368-1:2018, IDT)



ДСТУ EN IEC 62368-1:2022
(EN IEC 62368-1:2020, IDT; IEC 62368-1:2018, IDT)

Обладнання аудіо/відео, інформаційних та комунікаційних технологій.
Частина 1. Вимоги щодо безпеки

 
   
 
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

FOREWORD

INTRODUCTION

0 Principles of this product safety standard

0.1 Objective

0.2 Persons

0.3 Model for pain and injury

0.4 Energy sources

0.5 Safeguards

0.6 Electrically-caused pain or injury (electric shock)

0.7 Electrically-caused fire

0.8 Injury caused by hazardous substances

0.9 Mechanically-caused injury

0.10 Thermally-caused injury (skin burn)

0.11 Radiation-caused injury

1 Scope

2 Normative reference

3 Terms, definitions and abbreviated terms

3.1 Energy source abbreviations

3.2 Other abbreviations

3.3 Terms and definitions

4 General requirements

4.1 General

4.2 Energy source classifications

4.3 Protection against energy sources

4.4 Safeguards

4.5 Explosion

4.6 Fixing of conductors

4.7 Equipment for direct insertion into mains socket-outlets

4.8 Equipment containing coin / button cell batteries

4.9 Likelihood of fire or shock due to entry of conductive objects

4.10 Components requirements

5 Electrically-caused injury

5.1 General

5.2 Classification and limits of electrical energy sources

5.3 Protection against electrical energy sources

5.4 Insulation materials and requirements

5.5 Components as safeguards

5.6 Protective conductor

5.7 Prospective touch voltage, touch current and protective conductor current

5.8 Backfeed safeguard in battery backed up supplies

6 Electrically-caused fire

6.1 General

6.2 Classification of power sources (PS) and potential ignition sources (PIS)

6.3 Safeguards against fire under normal operating conditions and abnormal operating conditions

6.4 Safeguards against fire under single fault conditions

6.5 Internal and external wiring

6.6 Safeguards against fire due to the connection of additional equipment

7 Injury caused by hazardous substances

7.1 General

7.2 Reduction of exposure to hazardous substances

7.3 Ozone exposure

7.4 Use of personal safeguards or personal protective equipment (PPE)

7.5 Use of instructional safeguards and instructions

7.6 Batteries and their protection circuits

8 Mechanically-caused injury

8.1 General

8.2 Mechanical energy source classifications

8.3 Safeguards against mechanical energy sources

8.4 Safeguards against parts with sharp edges and corners

8.5 Safeguards against moving parts

8.6 Stability of equipment

8.7 Equipment mounted to a wall, ceiling or other structure

8.8 Handle strength

8.9 Wheels or casters attachment requirements

8.10 Carts, stands, and similar carriers

8.11 Mounting means for slide-rail mounted equipment (SRME)

8.12 Telescoping or rod antennas

9 Thermal burn injury

9.1 General

9.2 Thermal energy source classifications

9.3 Touch temperature limits

9.4 Safeguards against thermal energy sources

9.5 Requirements for safeguards

9.6 Requirements for wireless power transmitters

10 Radiation

10.1 General

10.2 Radiation energy source classifications

10.3 Safeguards against laser radiation

10.4 Safeguards against optical radiation from lamps and lamp systems (including LED types)

10.5 Safeguards against X-radiation

10.6 Safeguards against acoustic energy sources

Annex A (informative) Examples of equipment within the scope of this document

Annex В (normative) Normal operating condition tests, abnormal operating condition tests and single fault condition tests

Annex C (normative) UV radiation

Annex D (normative) Test generators

Annex E (normative) Test conditions for equipment containing audio amplifiers

Annex F (normative) Equipment markings, instructions, and instructional safeguards

Annex G (normative) Components

Annex H (normative) Criteria for telephone ringing signals

Annex I (informative) Overvoltage categories (see IEC 60364-4-44)

Annex J (normative) Insulated winding wires for use without interleaved insulation

Annex К (normative) Safety interlocks

Annex L (normative) Disconnect devices

Annex M (normative) Equipment containing batteries and their protection circuits

Annex N (normative) Electrochemical potentials (V)

Annex О (normative) Measurement of creepage distances and clearances

Annex P (normative) Safeguards against conductive objects

Annex Q (normative) Circuits intended for interconnection with building wiring

Annex R (normative) Limited short-circuit test

Annex S (normative) Tests for resistance to heat and fire

Annex T (normative) Mechanical strength tests

Annex U (normative) Mechanical strength of CRTs and protection against the effects of implosion

Annex V (normative) Determination of accessible parts

Annex W (informative) Comparison of terms introduced in this document

Annex X (normative) Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)

Annex Y (normative) Construction requirements for outdoor enclosures

Bibliography