ДСТУ EN 14825:2023 Кондиціонери, рідинні холодильні агрегати та теплові насоси з компресорами з електричним приводом для опалення та охолодження приміщень. Випробування та визначення характеристик в умовах ча...
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 20.12.2023 № 348
EN 14825:2022
Airconditioners, liquid chilling packages and heat pumps, with electrically driven
compressors, for space heating and cooling, commercial and process cooling -
Testing and rating at part load conditions and calculation of seasonal performance
прийнято як національний стандарт
методом «підтвердження» за позначенням
ДСТУ EN 14825:2023
(EN 14825:2022, IDT)
Кондиціонери, рідинні холодильні агрегати та теплові насоси
з компресорами з електричним приводом для опалення та охолодження приміщень.
Випробування та визначення характеристик в умовах часткового навантаження
та розрахунок сезонних робочих характеристик
З наданням чинності від 2023-12-26
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)
Contents
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, abbreviated terms and units
3.1 Terms and definitions
3.2 Symbols, abbreviated terms and units
4 Part load conditions for space cooling
4.1 General
4.2 Air-to-air units
4.3 Water(brine)-to-air units
4.4 Air-to-water(brine) units
4.5 Water(brine)-to-water(brine) units
5 Calculation methods for seasonal space cooling efficiency ηs,c, SEER and SEERon
5.1 General
5.2 Calculation of the seasonal space cooling efficiency ηs,c
5.3 General formula for calculation of SEER
5.4 Calculation of the reference annual cooling demand QC
5.5 Calculation of the reference annual energy consumption for space cooling QCE
5.6 Calculation of SEERon
5.7 Calculation procedure for determination of EERbin values at part load conditions A, B, C and D
6 Part load conditions for space heating
6.1 General
6.2 Air-to-air units
6.3 Water(brine)-to-air-units
6.4 Air-to-water(brine) units
6.5 DX-to-water(brine) and water(brine)-to-water(brine) units
7 Calculation methods for seasonal space heating efficiency ηs,h, SCOP, SCOPon and SCOPnet of heat pumps
7.1 General
7.2 Calculation of the seasonal space heating efficiency ηs,h
7.3 General formula for calculation of SCOP
7.4 Calculation of the reference annual heating demand QH
7.5 Calculation of the annual energy consumption for heating QHE
7.6 Calculation of SCOPon and SCOPnet
7.7 Calculation procedure for determination of COPbin values at part load conditions A to G
7.8 Method for Psup calculation
8 Test and calculation methods for hybrid units
8.1 General
8.2 Separated method
8.3 Combined test method
9 Part load conditions for process cooling
10 Calculation method for SEPR of process chillers and remote condenser process chillers
10.1 General formula for calculation of SEPR
10.2 Calculation procedure for determination of EERbin values at part load conditions A, B, C, D
11 Test methods for testing capacities, EERd and COPd values during active mode at part load conditions
11.1 General
11.2 Refrigerant piping
11.3 Basic principles
11.4 Uncertainties of measurement
11.5 Test procedures for units with fixed capacity
11.6 Test procedure for staged and variable capacity units
12 Test methods for electric power input during thermostat-off mode, standby mode and crankcase heater mode and off mode
12.1 Uncertainties of measurement
12.2 Measurement of electric power input during thermostat-off mode
12.3 Measurement of the electric power input during standby mode
12.4 Measurement of the electric power input during crankcase heater mode
12.5 Measurement of the electric power input during off mode
13 Test report
14 Testing and rating of individual indoor units
Annex A (informative) Applicable climate bins and hours for air conditioners with rated capacity of ≤ 12 kW for cooling, or heating if the product has no cooling function
Annex B (informative) Applicable climate bins and hours for air/water(brine)/DX-to-water(brine) heat pumps with a rated heat output ≤ 400 kW
Annex C (informative) Applicable climate bins and hours for process chillers
Annex D (informative) Applicable climate bins and hours for air-to-air units > 12 kW, water(brine)-to-air units and comfort chillers
Annex E (informative) Determination of water(brine) temperature for fixed capacity units with variable outlet temperature
Annex F (informative) Calculation example for SEER on and SEER - Application to a reversible air-to-air unit with variable capacity
Annex G (informative) Calculation example for SCOPon and SCOPnet - Application to a fixed capacity air-to-water(brine) heat pump used for low temperature application
Annex H (informative) Calculation example for SCOPon and SCOPnet - Application to a fixed capacity brine-to-water(brine) heat pump used for medium temperature application
Annex I (informative) Calculation examples for SCOPon for hybrid units
Annex J (informative) Calculation example for SEPR - Application to a process chiller with staged capacity
Annex K (informative) Compensation methods for air-to-water(brine) and water(brine)-to-water(brine) units
Annex L (normative) Rating of outdoor units of multi-split air conditioners and heat pumps
Annex M (normative) Testing and rating of individual indoor units
Annex ZA (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) No 206/2012 aimed to be covered
Annex ZB (informative) Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EU) No 626/2011 aimed to be covered
Annex ZC (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) No 813/2013 aimed to be covered
Annex ZD (informative) Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EU) No 811/2013 aimed to be covered
Annex ZE (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) 2015/1095 aimed to be covered
Annex ZF (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) 2016/2281 aimed to be covered
Bibliography
Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».