ДСТУ EN 13251:2017 Геотекстиль та вироби, що належать до геотекстилю. Характеристики, потрібні для використання під час виконання земляних робіт, будівництва фундаментів та підпорних конструкцій (EN 13251:201...
Не є офіційним виданням. Офіційне видання розповсюджує національний орган стандартизації (ДП «УкрНДНЦ»)
На даний документ посилаються наступні документи:
Інформація про документ
Посилання з інших документів
На даний документ посилаються наступні документи:
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(
(ДП «УкрНДНЦ»))
Наказ від 07.08.2017 № 210
EN 13251:2016
Geotextiles and geotextile-related products –
Characteristics required
for use in earthworks,
foundations and retaining structures
прийнято як національний стандарт
методом «підтвердження» за позначенням
ДСТУ EN 13251:2017
(EN 13251:2016, IDT)
Геотекстиль та вироби, що належать до геотекстилю.
Характеристики,
потрібні для використання під час виконання земляних робіт,
будівництва фундаментів та підпорних конструкцій
З наданням чинності від 2017–10–01
Contents
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 Required characteristics and corresponding methods of test
4.1 General
4.2 Selection of the appropriate standard in a specific application
4.3 Characteristics relevant to specific conditions of use
4.3.1 Stiffness at 2 %, 5 % and 10 %
4.3.2 Tensile strength of seams and joints
4.3.3 Static puncture
4.3.4 Friction characteristics
4.3.5 Tensile creep
4.3.6 Resistance to damage during installation
4.3.7 Water permeability normal to the plane
4.4 Release of dangerous substances
5 Assessment and verification of constancy of performance (AVCP)
5.1 General
5.2 Presentation of characteristics
5.3 Product type determination (PTD)
5.4 Factory production control (FPC)
5.5 Verification of values
5.6 Initial inspection of factory and of FPC
5.7 Continuous surveillance of FPC
6 Marking
Annex A (normative) Factory production control (FPC)
A.1 Factory production control scheme
A.1.1 General
A.1.2 Product design
A.1.3 Production
A.1.4 Finished products
A.1.5 Provisions applicable to A.1.2, A.1.3 and A.1.4 (to be used where appropriate)
A.2 Assessment of a factory production control (FPC) system
A.2.1 General
A.2.2 Checklist
A.2.3 Test frequency
Annex B (normative) Durability aspects
B.1 General
B.1.1 Service life
B.1.2 Initial and repeat testing of durability
B.1.3 Use of rework material
B.2 Weathering (all products)
B.3 Products used in non-reinforcing applications and with service lives up to 5 years
B.4 Other applications and service lives up to 25 years, 50 years and 100 years
B.4.1 General
B.4.2 Tests for specific materials
Annex C (informative) Guidelines for the selection of the appropriate standard in a specific application
Annex D (informative) Significant technical changes to superseded versions of this standard
Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for AVCP of Geotextiles and geotextiles-related products for the use in the construction of earthworks, foundations and retaining structures
ZA.2.1 Systems of AVCP
ZA.2.2 Declaration of performance (DoP)
ZA.3 CE marking and labelling
Bibliography
Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».