ДСТУ EN 14382:2015 Захисні пристрої для газорегулювальних станцій та установок. Пристрої запірні захисні для тиску газу на вході до 100 бар (EN 14382:2005+A1:2009, IDT)
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(
(ДП «УкрНДНЦ»))
Наказ від 25.12.2015 № 207 (у редакції наказу від 20.05.2016 № 137)
EN 14382:2005+A1:2009
Safety devices for gas pressure regulating stations and installations –
Gas safety shut-off devices for inlet
pressures up to 100 bar
прийнято як національний стандарт
методом «підтвердження» за позначенням
ДСТУ EN 14382:2015
(EN 14382:2005+A1:2009, IDT)
Захисні пристрої для газорегулювальних станцій та установок.
Пристрої запірні захисні для тиску
газу на вході до 100 бар
З наданням чинності від 2016–01–01
Contents
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Construction requirements
4.1 Basic requirements
4.2 Materials
4.3 Strength of housings
5 Functional requirements
5.1 General
5.2 Shell strength, external tightness and internal sealing
5.3 Accuracy group
5.4 Response time
5.5 Relatching difference and unlatching
5.6 Closing force
5.7 Endurance and accelerated ageing
5.8 Strength of the trip mechanism, valve seat and closing member against the dynamic impact of flowing gas
5.9 Flow coefficient
5.10 Final visual inspection
6 Testing
6.1 General
6.2 Tests
6.3 Type test
6.4 Selection of test samples
6.5 Routine tests
6.6 Production surveillance
7 Test and verification methods
7.1 Dimensional check and visual inspection
7.2 Materials check
7.3 Verification of the strength of pressure containing parts and inner metallic partition walls
7.4 Verification of the strength of parts transmitting actuating forces
7.5 Shell and inner metallic partition walls strength test
7.6 Alternative shell and inner metallic walls strength test
7.7 External tightness test
7.8 Internal sealing test
7.9 Accuracy group
7.10 Response time
7.11 Relatching difference and unlatching
7.12 Closing force
7.13 Endurance and accelerated ageing
7.14 Resistance to gas of non metallic parts
7.15 Verification of the strength of the trip mechanism, valve seat and closing member against dynamic impact of flowing gas
7.16 Final visual inspection
Documentation
8.1 Documentation related to type test
8.2 Documentation for the customer
8.3 Documentation related to production surveillance in accordance with 6.6
9 Marking
9.1 General requirements
9.2 Marking of connections for sensing, exhaust and breather lines
9.3 Identification of auxiliary devices
Annex A (informative) Ice formation
Annex B (informative) Compliance evaluation
Annex C (informative) Pressure drop and flow coefficient
Annex D (informative) Alternative test method for verification of the strength of the trip mechanism, valve seat and closing member
Annex E (informative) Sizing equation
Annex F (informative) Inspection certificate
Annex G (informative) Order specification
Annex H (informative) Acceptance test
Annex I (informative) Seat leakage (alternative requirement)
Annex J (normative) Materials
Annex K (informative) Suitability of safety shut-off device for damp operating conditions
Annex L (informative) Glossary
Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC
Bibliography
Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».