ДСТУ EN 1143-1:2019 Засоби безпечного зберігання. Вимоги, класифікація та методи випробування на тривкість щодо зламування. Частина 1. Сховища, двері сховищ, сейфи та АТМ-сейфи (EN 1143-1:2019, ІDT)
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(
(ДП «УкрНДНЦ»))
Наказ від 18.12.2019 № 440
EN 1143-1:2019
Secure storage units — Requirements, classification
and methods of test for resistance to burglary —
Part 1: Safes, ATM safes, strongroom doors and strongrooms
прийнято як національний стандарт
методом «підтвердження» за позначенням
ДСТУ EN 1143-1:2019
(EN 1143-1:2019, IDT)
Засоби безпечного зберігання.
Вимоги, класифікація та методи
випробування на тривкість щодо зламування.
Частина 1. Сховища, двері сховищ, сейфи та АТМ-сейфи
З наданням чинності від 2020-01-01
Contents
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and requirements
4.1 Classification
4.2 General requirements
4.3 Additional requirements for EX designation
4.4 Additional requirements for GAS designation
4.5 Additional requirements for CD designation
4.6 Additional requirements for T2 designation
5 Technical documentation
6 Test specimen
7 Tool attack test
7.1 Principle
7.2 Testing team
7.3 Apparatus
7.4 Test criteria
7.5 Testing programme
7.6 Test conditions
7.7 Procedure
7.8 Operating time measuring
7.9 Calculation of resistance values
7.10 Test record
8 Anchoring strength test
8.1 Free-standing safes
8.2 ATM safes
9 EX explosive test
9.1 Principle
9.2 Test specimen
9.3 Explosives
9.4 Determination of active explosive charge mass
9.5 Conditions for explosive attack test
9.6 Calculation of resistance values for the post-detonation tool attack
9.7 Test record
10 GAS explosive test
10.1 Principle
10.2 Test specimen
10.3 Gas
10.4 Determination of gas charge volume
10.5 Test equipment for gas attack testing
10.6 Procedure for gas attack testing
10.7 Calculation of resistance values for the post-detonation tool attack
10.8 Test record
10.9 Marking
11 Core drilling test
11.1 Principle
11.2 Test specimen
11.3 Apparatus
11.4 Test method
11.5 Calculation of resistance value
11.6 Marking
12 Tool attack test T2
12.1 Principle
12.2 Marking
13 Test report
14 Marking
Annex A (normative) Attack tools
Annex В (normative) Attack tools T2
Annex C (informative) Examples for ATM systems and non-ATM systems
Bibliography
Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».