ДСТУ EN 14318-1:2019 Матеріали теплоізоляційні для будівель. Виготовлені на будівельному майданчику вироби з жорсткого пінополіуретану (PUR) і пінополіізоціанурату (PIR). Частина 1. Технічні вимоги до системи...
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 23.12.2019 № 479
EN 14318-1:2013
Thermal insulating products for buildings —
In-situ formed dispensed rigid polyurethane (PUR)
and polyisocyanurate (PIR) foam products —
Part 1: Specification for the rigid foam
dispensed system before installation
прийнято як національний стандарт
методом підтвердження за позначенням
ДСТУ EN 14318-1:2019
(EN 14318-1:2013, IDT)
Матеріали теплоізоляційні для будівель.
Виготовлені на будівельному майданчику вироби
з жорсткого пінополіуретану (PUR) і пінополіізоціанурату (PIR).
Частина 1. Технічні вимоги до системи заливання
жорстких піноматеріалів щодо їхнього застосування
З наданням чинності від 2020–01–01
Відповідає офіційному тексту
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)
Contents
Foreword
1 Scope
2 Normative references
3Terms, definitions, symbols and abbreviations
3.1 Terms and definitions
3.2 Symbols and abbreviations
4 Requirements
4.1 General
4.2 For all applications
4.3 Specific applications
5 Test methods
5.1 Sampling and test specimen preparation
5.2 Conditioning
5.3 Testing
6 Designation code
7 Evaluation of conformity
7.1 General
7.2 Initial type testing
7.3 Factory production control
8 Marking, labelling and technical information
8.1 Marking and labelling
8.2 Technical information
Annex A (normative) Determination of declared aged thermal conductivity and aged thermal resistance
Annex B (normative) Determination of substrate adhesion strength perpendicular to faces
Annex C (normative) Determination of the aged values of thermal resistance and thermal conductivity
Annex D (normative) Initial type testing (ITT) and Factory production control (FPC)
Annex E (normative) Determination of the reaction profile and free-rise density
Annex F (normative) Sample preparation method for the test specimens for the thermal conductivity test
Annex G (normative) Sample preparation method for the test specimens other than thermal conductivity
Annex H (normative) Testing for reaction to fire of products
Annex I (normative) Testing for reaction to fire of products in standardised assemblies simulating end-use application(s)
Annex J (informative) Example for the determination of the declared aged values of thermal conductivity and thermal resistance for a product
Case where both thermal conductivity and thermal resistance are declared
Annex K (normative) Instructions for compiling thermal resistance performance charts
Annex ZA (informative) Clause of this European Standard addressing the provisions of the provisions of the EU Construction Products Directive
Bibliography
Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».