ДСТУ EN 60870-5-104:2022 Устройства и системы телеуправления. Часть 5-104. Протоколы передачи. Доступ к сети согласно IEC 60870-5-101 с использованием стандартных профилей передачи данных (EN 60870-5-104:2006...



ДСТУ EN 60870-5-104:2022
(EN 60870-5-104:2006, IDT; IEC 60870-5-104:2006, IDT)

Пристрої та системи телекерування. Частина 5-104. Протоколи передавання.
Доступ до мережі згідно з IEC 60870-5-101 із використанням стандартних
профілів передавання даних

 

 
   
 
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Introduction

1 Scope and object

2 Normative references

3 General architecture

4 Protocol structure

5 Definition of Application Protocol Control Information (APCI)

5.1 Protection against loss and duplication of messages

5.2 Test procedures

5.3 Transmission control using Start/Stop

5.4 Portnumber

5.5 Maximum number of outstanding I format APDUs (k)

6 Selection of ASDUs defined in IEC 60870-5-101 and additional ASDUs

7 Mapping of selected application data units and functions to the TCP services

7.1 Station initialization (6.1.5 to 6.1.7 of IEC 60870-5-5)

7.2 Data acquisition by polling (6.2 of IEC 60870-5-5)

7.3 Cyclic data transmission (6.3 of IEC 60870-5-5)

7.4 Acquisition of events (6.4 of IEC 60870-5-5)

7.5 General interrogation (6.6 of IEC 60870-5-5)

7.6 Clock synchronization (6.7 of IEC 60870-5-5)

7.7 Command transmission (6.8 of IEC 60870-5-5)

7.8 Transmission of integrated totals (6.9 of IEC 60870-5-5)

7.9 Parameter loading (6.10 of IEC 60870-5-5)

7.10 Test procedure (6.11 of IEC 60870-5-5)

7.11 File transfer (6.12 of IEC 60870-5-5) Control and monitor direction

8 ASDUs for process information in control direction with time tag

8.1 TYPE IDENT 58: C_SC_TA_1 Single command with time tag CP56Time2a

8.2 TYPE IDENT 59: C_DC_TA_1 Double command with time tag CP56Time2a

8.3 TYPE IDENT 60: C_RC_TA_1 Regulating step command with time tag CP56Time2a

8.4 TYPE IDENT 61: C_SE_TA_1 Set-point command with time tag CP56Time2a, normalized value

8.5 TYPE IDENT 62: C_SE_TB_1 Set-point command with time tag CP56Time2a, scaled value

8.6 TYPE IDENT 63: C_SE_TC_1 Set-point command with time tag CP56Time2a, short floating point num ber

8.7 TYPE IDENT 64: C_BO_TA_1 Bitstring of 32 bit with time tag CP56Time2a

8.8 TYPE IDENT 107: C_TS_TA_1 Test command with time tag CP56Time2a

8.9 TYPE IDENT 127: F_SC_NB_1 QueryLog - Request archive file

9 Interoperability

9.1 System or device

9.2 Network configuration

9.3 Physical layer

9.4 Link layer

9.5 Application layer.

9.6 Basic application functions

10 Redundant connections

10.1 General

10.2 General requirements

10.3 Initialisation of controlling station

10.4 Initialisation of controlled station

10.5 User data from controlling station

10.6 User data from controlled station

10.7 State transition diagrams

Annex ZA (normative) Normative references to international publications with their corresponding European publications