ДСТУ EN 12978:2025 Дверь и ворота гаражей, промышленных и торговых предприятий. Устройства безопасности для дверей и ворот. Требования и методы испытаний (EN 12978:2024, IDT)



ДСТУ EN 12978:2025
(EN 12978:2024, IDT)

Двері й ворота гаражів, промислових і торговельних підприємств.
Пристрої безпечності для дверей і воріт.
Вимоги та методи випробувань

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 List of significant hazards

4.1 General

4.2 Hazards caused by fixing

4.3 Hazards caused by the shape

4.4 Hazards caused by use of energy

4.5 Hazards generated by optical radiation

4.6 Hazards caused by out of range wavelength of the optical detection technology

4.7 Hazards caused by the loss of the safety function

4.7.1 Loss of the sensing function because of temperature and humidity

4.7.2 Loss of the sensing function because of vibration and shock

4.7.3 Loss of the sensing function because of light interference

4.7.4 Loss of the sensing function because of environmental pollution

4.8 Hazards caused by lack of detection capability

4.9 Hazards caused by inadequate setting

4.10 Hazards caused by permanent deformation of PSPE sensing element

4.11 Hazards caused by loss of safety integrity

4.12 Hazards caused by electro-magnetic disturbances - Immunity

5 Safety requirements and/or protective/risk reduction measures

5.1 General

5.2 Fixing

5.3 Shape

5.4 Use of energy

5.4.1 Electrical equipment

5.4.2 Hydraulic equipment

5.4.3 Pneumatic equipment

5.5 Optical radiation

5.6 Wavelength of the optical detection technology

5.7 Safety function of the sensitive protective equipment

5.7.1 Temperature and humidity

5.7.2 Vibration and shock

5.7.3 Light interference

5.7.4 Environmental pollution (IP Code)

5.8 Detection capability

5.8.1 PSPE

5.8.2 ESPE

5.9 Inadequate settings

5.10 Deformation of PSPE sensing element

5.11 Performance level

5.12 Electromagnetic compatibility - Immunity

6 Verification of the safety requirements and/or protective/risk reduction measures

6.1 General

6.2 Fixing

6.3 Shape

6.4 Use of energy

6.4.1 Electrical equipment

6.4.2 Hydraulic equipment

6.4.3 Pneumatic equipment

6.5 Optical radiation

6.6 Wavelength of the optical detection technology

6.7 Safety function of the protective equipment

6.7.1 Temperature and humidity

6.7.2 Vibration and shock

6.7.3 Verification of light interference

6.7.4 Verification of losing sensing function because of environmental pollution (IP Code)

6.8 Detection capability

6.8.1 PSPE

6.8.2 ESPE

6.9 Verification of inadequate settings

6.10 Verification of recovery of deformation of PSPE sensing element

6.11 Verification of performance level

6.12 Electromagnetic compatibility - Immunity

7 Information for use

7.1 General

7.2 Instruction handbook

7.3 Marking

Annex A (normative) Test pieces

Annex B (normative) Reflection test

B.1 Testing of light curtains

B.2 Reflection testing of light barriers

Annex C (informative) Relationship between hazards, hazardous situations and hazardous events covered by this document and relevant requirements and test methods subclauses

Annex ZA (informative) Relationship between this European Standard and the essential requirements of Directive 2006/42/EC aimed to be covered

Bibliography