ДСТУ EN ISO 21920-3:2022 Геометрические спецификации изделия (GPS). Текстура поверхности: профиль. Часть 3. Спецификационные операторы (EN ISO 21920-3:2022, IDT; ISO 21920-3:2022, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ДСТУ EN ISO 21920-3:2022
(EN ISO 21920-3:2022, IDT; ISO 21920-3:2021, IDT)

Геометричні специфікації виробу (GPS). Текстура поверхні: профіль.
Частина 3. Специфікаційні оператори

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Complete specification operator

4.1 Introduction

4.2 General

4.3 General default settings

4.4 Default settings based on the specification

4.4.1 General rules

4.4.2 Default settings based on Nic or Scn

4.4.3 Default settings for Ra, Rq, Rz, Rp, Rv, Rzx and Rt based on the upper tolerance limit

4.4.4 Default settings for Ra, Rq, Rz, Rp, Rv, Rzx and Rt based on bilateral tolerance limits

4.4.5 Default settings for Ra, Rq, Rz, Rp, Rv, Rzx and Rt based on the lower tolerance limit

4.4.6 Default settings for Pt

5 Default attribute values for parameters from ISO 21920-2

5.1 General

5.2 Default attribute values for height parameters and spatial parameters

5.3 Default attribute values for material ratio functions and related parameters

5.4 Default attribute values for volume parameters

5.5 Default attribute values for feature parameters

6 Default units for parameters from ISO 21920-2

6.1 General

6.2 Height parameters

6.3 Spatial parameters

6.4 Hybrid parameters

6.5 Material ratio functions and related parameters

6.6 Volume parameters

6.7 Feature parameters

Annex A (informative) How to determine specification operators

Annex B (informative) Examples of the determination of default settings

Annex C (informative) Major changes from ISO 4288

Annex D (informative) Settings for profile surface texture evaluation in the absence of a specification

Annex E (informative) Overview of profile and areal standards in the GPS matrix model

Annex F (informative) Relation with the GPS matrix

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online