ДСТУ EN 50486:2014 Оборудование для использования в системах аудио и видео входа дверей (EN 50486:2008, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

МІНІСТЕРСТВО ЕКОНОМІЧНОГО РОЗВИТКУ І ТОРГІВЛІ УКРАЇНИ

Наказ від 30.12.2014 № 1494

EN 50486:2008

Equipment for use in audio and video door-entry systems

прийнято як національний стандарт
методом «підтвердження» за позначенням
 

ДСТУ EN 50486:2014
(EN 50486:2008, IDТ)

Устатковання для використання в системах
аудіо і відео входу дверей

З наданням чинності від 2016-01-01

Contents

Foreword

1 Scope

2 Normative references

3 Terms and definitions

3.1 Equipment for audio and video door-entry systems

3.2 Functions

3.3 Environmental conditions

3.4 Other definitions

4 General specifications

4.1 Safety requirements

4.2 EMC requirements

4.3 Minimum functions

5 Audio specifications

5.1 Larsen effect

5.2 Frequency response

5.3 Acoustic pressure levels in normal condition

5.4 Call level

5.5 Safety acoustic pressure levels

6 Video specifications - General requirements

7 Environmental requirements

8 ‘Anti-vandalism’ protection requirements

9 Documentation

Annex A (normative) Test methods

A.1 General

A.2 Definitions

A.3 Audio tests

A.4 Acoustic stability (Larsen effect) test

A.5 Acoustic call indicator

A.6 Video tests

A.7 Anti-vandalism tests

Bibliography

Figures

Figure A.1 - Circular chart

Figure A.2 - IMD chart

Figure A.3 - Audio tests on hands-free stations - Setup type 1

Figure A.4 - Audio tests on hands-free stations - Setup type 2

Figure A.5 - Audio tests on stations with a handset - Setup type 1

Figure A.6 - Audio tests on stations with a handset - Setup type 2

Figure A.7 - Setup for acoustic stability test

Figure A.8 - Test chamber for acoustic stability test

Figure A.9 - Setup for acoustic pressure test

Figure A.10 - Setup for safety test

Figure A.11 - Setup for safety test

Figure A.12 - Circle position for the geometric distortion test

Figure A.13 - Radii for geometric distortion test

Tables

Table 1 - Minimum functions

Table 2 - Environmental requirements

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online