ДСТУ EN 16402:2015 Краски и лаки. Оценка эмиссии веществ из покрытий в воздух помещений. Отбор проб, кондиционирование и испытания (EN 16402:2013, IDT)

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

    (ДП «УкрНДНЦ»)
Наказ від 05.11.2015 № 145

EN 16402:2013

еn: Paints and varnishes - Assessment of emissions of substances from coatings
into indoor air - Sampling, conditioning and testing

прийнято як національний стандарт
методом «підтвердження» за позначенням
 

ДСТУ EN 16402:2015

uk: Фарби та лаки. Оцінювання емісії речовин з покриттів
у повітря приміщень. Відбирання проб,
кондиціювання та випробування
(EN 16402:2013, IDT)

З наданням чинності від 2016–01–01

 Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

3.1 Terms relating to sampling and product

3.2 Terms relating to emissions into indoor air and associated laboratory testing

3.3 Terms relating to determination of emitted substances

4 Principle

5 Product categories

6 Relevant substances emitted from coatings

7 Emission scenarios and reference room

7.1 Dimensions and loading factors of the reference room

7.2 Ventilation in the reference room

7.3 Climate conditions of the reference room

7.4 Time schedule of emission determination

8 Product sampling and transport

8.1 Population of the product to be considered for testing

8.2 Sampling

8.3 Transport

8.4 Chain of custody

8.5 Dispatch of samples, time schedule

9 Handling of product samples in the laboratory

9.1 Storage

9.2 Preparation of test specimen: Coatings

9.3 Preparation of test specimen: Coating systems

9.4 Preconditioning

10 Test chamber conditions

11 Determination of vapour-phase organic compounds in test chamber air

11.1 Common requirements

11.2 Determination of VOCs and SVOCs in test chamber air

11.3 Determination of formaldehyde and some other volatile carbonyl compounds in test chamber air

11.4 Quality control – External references

12 Calculation of specific emission rates and expression of results at the reference room

13 Test report

13.1 General

13.2 Sampling

13.3 Handling of samples in the laboratory, preparation of test specimen

13.4 Test chamber conditions

13.5 Determination of vapour-phase organic compounds in test chamber air

13.6 Calculation of specific emission rates and expression of results in terms of air concentration in the reference room

14 'Indirect' methods

14.1 General

14.2 Requirements

14.3 Examples of indirect methods

Annex A (informative) Examples of simplified/secondary methods

Annex B (informative) Information on very volatile organic compound (VVOC) testing

Annex C (informative) Example form for a chain of custody report

Annex D (informative) Benzene artefact generation on Tenax TA

Annex E (informative) Example of a form for the sampling report

Annex F (informative) Overview of test procedure

Bibliography