ДСТУ EN 55015:2014 Нормы и методы измерения характеристик радиопомех электрического осветительного и аналогичного оборудования (EN 55015:2013, IDT)
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 29.12.2014 № 1483
Наказ від 21.11.2019 № 369
EN 55015:2013
Limits and methods of measurement of radio disturbance characteristics
of electrical lighting and similar equipment
прийнято як національний стандарт
методом підтвердження за позначенням
ДСТУ EN 55015:2014
Норми та методи вимірювання характеристик радіозавад
електричного освітлювального й аналогічного обладнання
(EN 55015:2013, IDT)
З наданням чинності від 2016–01–01
Поновлено чинність від 2019–12–01
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)
CONTENTS
1 Scope
2 Normative references
3 Terms and definitions
4 Limits
4.1 Frequency ranges
4.2 Insertion loss
4.3 Disturbance voltages
4.4 Radiated electromagnetic disturbances
5 Application of the limits
5.1 General
5.2 Indoor luminaires
5.3 Independent auxiliaries exclusively for use with lighting equipment
5.4 Self-ballasted lamps
5.5 Outdoor lighting appliances
5.6 UV and IR radiation appliances
5.7 Transport lighting
5.8 Requirements for luminaires for cold cathode tubular discharge lamps (e.g. neon tubes) used, for example, for advertising purposes
5.9 Self-contained emergency lighting luminaires
5.10 Replaceable starters for fluorescent lamps
5.11 LED light sources and associated luminaires
6 Operating conditions for lighting equipment
6.1 General
6.2 Lighting equipment
6.3 Supply voltage and frequency
6.4 Ambient conditions
6.5 Lamps
6.6 Replaceable starters
7 Method of insertion loss measurement
7.1 Circuits for the measurement of insertion loss
7.2 Measuring arrangement and procedure
7.3 Luminaire
7.4 Measurement procedure
8 Method of measurement of disturbance voltages
8.1 Measuring arrangement and procedure
8.2 Indoor and outdoor luminaires
8.3 Independent light regulating devices
8.4 Independent transformers and convertors for incandescent lamps or LED light sources
8.5 Independent ballasts for fluorescent and other discharge lamps
8.6 Self-ballasted lamps and semi-luminaires
8.7 UV and IR radiation appliances
8.8 Self-contained emergency lighting luminaires
8.9 Independent starters and igniters for fluorescent and other discharge lamps
9 Method of measurement of radiated electromagnetic disturbances
9.1 Measuring arrangement and procedure related to Subclause 4.4.1
9.2 Measuring arrangement and procedure related to Subclause 4.4.2
9.3 Indoor and outdoor luminaires
9.4 Independent convertors for incandescent lamps or LED light sources
9.5 Independent ballasts for fluorescent and other discharge lamps
9.6 Self-ballasted lamps and semi-luminaires
9.7 UV and IR radiation appliances
9.8 Self-contained emergency lighting luminaires
10 Interpretation of CISPR radio disturbance limits
10.1 Significance of a CISPR limit
10.2 Tests
10.3 Statistical method of evaluation Non-compliance
10.4 Measurement uncertainty
Annex A (normative) Electrical and constructional requirements for the low-capacitance balance-to-unbalance transformer
Annex В (normative) Independent method of measurement of radiated disturbances
Annex C (normative) Example test arrangements during CISPR 32 radiated disturbance measurement
Annex D (informative) Applicability of methods and limits for different types of equipment
Bibliography
Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».