ДСТУ EN ISO 12215-6:2019 Суда малые. Строительство и наборы корпуса судна. Часть 6. Системы и детальные схемы набора корпуса судна (EN ISO 12215-6:2018, IDT; ISO 12215-6:2008, IDT)



ДСТУ EN ISO 12215-6:2019
(EN ISO 12215-6:2018, IDT; ISO 12215-6:2008, IDT)

Судна малі. Будівництво та набори корпусу судна.
Частина 6. Системи та детальні схеми набору корпусу судна

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols

5 General

6 Structural arrangement

6.1 Stiffening

6.2 Hull girder strength

6.3 Load transfer

6.4 Determination of stiffener spans

6.5 Window mullions

6.6 Sailboat mast support

7 Specific structural details for FRP construction

7.1 Local reinforcement

7.2 Bonding

7.3 Major joints

7.4 Laminate transition

7.5 Sandwich construction

7.6 Attachment of fittings

7.7 Engine seatings and girders

7.8 Hull drainage

8 Specific structural details for metal construction

8.1 Design details

8.2 End connections

8.3 Increased hull plating

8.4 Protective keel

8.5 Hull drainage

8.6 Machinery spaces

8.7 Good practice welding standards

8.8 Good practice for riveting or adhesive bonding

9 Good practice on laminated wood

9.1 Edge sealing

9.2 Plywood orientation

9.3 Local scantlings

9.4 Alternative criteria

10 Consideration of other loads

11 Other structural components

11.1 General

11.2 Rudder structure and connection

11.3 Keel attachment

11.4 Introduction and distribution of rigging loads

11.5 Other structural components not considered in other parts

Annex A (normative) Structural arrangements for category C and D boats

Annex B (informative) Determination of shear stresses within a stiffener with glued or riveted joints

Annex C (informative) Good practice welding procedure

Annex D (informative) Longitudinal strength analysis

Bibliography