ДСТУ EN 62321:2014 Электротехническая продукция. Определение уровней шести регламентированных веществ (свинец, ртуть, кадмий, шестивалентный хром, полибромбифенилы, полибромдифениловые эфиры) (ЕN 62321:2009,...

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Наказом Міністерства економічного розвитку і торгівлі України

від 30.12.2014 № 1494

EN 62321:2009

en: Electrotechnical products. Determination of levels of six regulated substances
(lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated
diphenyl ethers)

прийнято як національним стандарт
методом «підтвердження» за позначенням
 

ДСТУ EN 62321:2014
(EN 62321:2009, IDT)

uk: Електротехнічна продукція. Визначення рівнів шести регламентованих речовин
(свинець, ртуть, кадмій, шестивалентний хром, полібромбіфеніли,
полібромдифенілові ефіри)

З наданням чинності від 2016-01-01

CONTENTS

INTRODUCTION

1 Scope

2 Normative references

3 Terms, definitions and abbreviations

3.1 Terms and definitions

3.2 Abbreviations

4 Test methods - Overview

4.1 Field of application

4.2 Sample

4.3 Test methods - Flow chart

4.4 Adjustment to the matrix

4.5 Limits of detection (LOD) and limits of quantification (LOQ)

4.6 Test report

4.7 Alternative test methods

5 Mechanical sample preparation

5.1 Overview

5.2 Apparatus, equipment and materials

5.3 Procedure

6 Screening by X-ray fluorescence spectrometry (XRF)

6.1 Overview

6.2 Apparatus, equipment and materials

6.3 Reagents

6.4 Sampling

6.5 Procedure

6.6 Calculations

6.7 Evaluation of the method

6.8 Quality control

6.9 Special cases

7 Determination of mercury in polymers, metals and electronics by CV-AAS, CV- AFS, ICP-OES and ICP-MS

7.1 Overview

7.2 Apparatus, equipment and materials

7.3 Reagents

7.4 Sample preparation

7.5 Test procedure

7.6 Evaluation of the method

8 Determination of lead and cadmium in polymers by ICP-OES, ICP-MS and AAS

8.1 Overview

8.2 Apparatus, equipment and materials

8.3 Reagents

8.4 Sample preparation

8.5 Test procedure

8.6 Evaluation of the method

9 Determination of lead and cadmium in metals by ICP-OES, ICP-MS and AAS

9.1 Overview

9.2 Apparatus, equipment and materials

9.3 Reagents

9.4 Sample preparation

9.5 Preparation of laboratory reagent blank

9.6 Test procedure

9.7 Evaluation of the method

10 Determination of lead and cadmium in electronics by ICP-OES, ICP-MS and AAS

10.1 Overview

10.2 Apparatus, equipment and materials

10.3 Reagents

10.4 Sample preparation

10.5 Test procedure

10.6 Evaluation of the method

Annex A (informative) Determination of PBB and PBDE in polymers by GC-MS

Annex В (informative) Test for the presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals

Annex C (Informative) Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method

Annex D (informative) Practical application of screening by X-ray fluorescence spectrometry (XRF)

Annex E (informative) Practical application of determination of mercury in polymers, metals and electronics by CV-AAS, CV-AFS. ICP-OES and ICP-MS

Annex F (informative) Practical application of determination of lead and cadmium in polymers by ICP-OES, ICP-MS and AAS

Annex G (informative) Practical application of determination of lead and cadmium in metals by ICP-OES, ICP-MS and AAS

Annex H (informative) Practical application of determination of lead and cadmium in electronics by ICP-OES, ICP-MS and AAS

Bibliography