ДСТУ EN 1365-2:2022 Випробування на вогнестійкість несівних елементів. Частина 2. Підлоги та дахи (EN 1365-2:2014, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ


ДСТУ EN 1365-2:2022
(EN 1365-2:2014, IDT)

Випробування на вогнестійкість несівних елементів. Частина 2. Підлоги та дахи




 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

1 Scope

2 Normative references

3 Terms, definitions, symbols and designations

3.1 Terms and definitions

3.2 Symbols and designations

4 Test equipment

5 Test conditions

5.1 Furnace

5.2 Loading conditions

6 Test specimen

6.1 General

6.2 Size

6.3 Number

6.3.1 General

6.3.2 Pitched roof constructions without glazing

6.4 Design

6.4.1 General

6.4.2 Floor or roof construction

6.4.3 Ceiling system

6.4.4 Pitched roof constructions

6.4.5 Floor and roof constructions incorporating glazing

6.4.6 Support and restraint conditions

6.5 Construction

6.6 Verification

7 Installation of test specimen

8 Conditioning

9 Application of instrumentation

9.1 Thermocouples

9.1.1 Furnace thermocouples (plate thermometers)

9.1.2 Unexposed surface thermocouples for constructions without glazing

9.2 Pressure

9.3 Deflection

9.4 Radiation

10 Test procedure

10.1 General

10.2 Application and control of load

10.3 Furnace control

10.4 Observations during the test

10.5 Termination of the test

11 Performance criteria

12 Test report

13 Field of direct application of test results for constructions without glazing

Annex A (normative) Specific requirements for testing floor and roof constructions incorporating glazing

A.1 General

A.2 Test specimen design

A.3 Test specimen instrumentation

A.3.1 General

A.3.2 Average temperature rise

A.3.2.1 Uniform glazing

A.3.2.2 Non-uniform glazing

A.3.3 Maximum temperature rise

A.3.3.1 General

A.3.3.2 Sloped constructions

A.3.3.3 Horizontal constructions

A.3.4 Deflection

A.3.5 Radiation measurement

A.4 Performance criteria

A.5 Field of direct application of test results

A.5.1 General

A.5.2 Shapes of flat glass panes

A.5.3 Span length

A.5.4 Extension of width in direction perpendicular to the span

A.5.5 Inclination angle

A.5.6 Supporting constructions

A.5.6.1 General

A.5.6.2 Standard supporting constructions

A.5.6.3 Non-standard supporting construction

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online