ДСТУ EN 14492-1:2014 Крани вантажопідйомні. Лебідки та талі з механічним приводом. Частина 1. Лебідки з механічним приводом (EN 14492-1:2006+A1:2009, EN 14492-1:2006+A1:2009/AC:2010, IDT)

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Наказом Міністерства економічного розвитку і торгівлі України

від 29.12.2014 № 1479

EN 14492-1:2006+A1:2009

Cranes - Power driven winches and hoists - Part 1: Power driven
winches

прийнято як національний стандарт
методом «підтвердження» за позначенням
 

ДСТУ EN 14492-1:2014
(EN 14492-1:2006+A1:2009,EN 14492-1:2006+A1:2009/AC:2010, IDT)

Крани вантажопідйомні. Лебідки та талі з механічним приводом.
Частина 1. Лебідки з механічним приводом

З наданням чинності від 2016–01–01

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 List of significant hazards

5 Safety requirements and/or protective measures

5.1 General

5.2 Devices

5.3 Couplings

5.4 Brakes for lifting and lowering movements

5.5 Gearbox

5.6 Load hooks

5.7 Rope drive

5.8 Chain drives

5.9 Belt drives

5.10 Pneumatic equipment

5.11 Hydraulic equipment

5.12 Electrical equipment of winches

5.13 Reduction of noise by design

5.14 Winches for use in a potentially explosive atmosphere

5.15 Additional requirements for vehicle recovery winches and winches on boat trailers

5.16 Additional requirements for forestry winches

5.17 Additional and deviating requirements for winches for pulling purposes

6 Verification of the safety requirements and/or protective measures

6.1 Winches manufactured in series

6.2 Winches designed individually

7 User information

7.1 General

7.2 Special requirements

7.3 Marking

Annex A (informative) Examples of winches

A.1 Drum winches

A.2 Traction winches

A.3 Vehicle recovery winches

A.4 Winches for boat trailers

A.5 Forestry winches

Annex B (informative) Additional requirements for winches intended to be used in potentially explosive atmospheres

B.1 Introduction

B.2 General

B.3 Hazard sources in explosion hazard areas

B.3.1 Electrically caused hazards

B.3.2 Mechanically caused hazards

B.3.3 Hazards caused by environmental conditions

B.3.4 Measures to eliminate hazards in explosion hazard areas

B.3.5 Marking

B.4 User information

Annex C (informative) Additional requirements for operation in aggressive environments and outdoors

C.1 General

C.2 Ropes and chains

Annex D (informative) Additional requirements for operation at low temperatures

Annex E (informative) Documents for hooks

Annex F (normative) Noise test code

F.1 Scope

F.2 Standards used in this annex

F.3 Description of the machine family

F.4 Determination of the emission sound pressure level at the operators position by measurement

F.4.1 General

F.4.2 Winches other than construction winches

F.5 Determination of the sound power level

F.5.1 General

F.5.2 Winches other than construction winches

F.5.3 Construction winches

F.6 Mounting and operating conditions

F.6.1 General

F.6.2 Winches other than construction winches

F.6.3 Construction winches

F.7 Uncertainties

F.8 Information to be recorded

F.9 Information to be reported

F.10 Declaration and verification of noise emission values

Annex G (informative) Selection of a suitable set of cranes standards for a given application

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC

Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 94/9/EC