ДСТУ EN 60076-6:2015 Силові трансформатори. Частина 6. Реактори (EN 60076-6:2008, IDT)

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Наказ ДП «УкрНДНЦ»
від 05.11.2015 № 145

EN 60076-6:2008

еn: Power transformers - Part 6: Reactors

прийнято як національний стандарт методом підтвердження за позначенням

ДСТУ EN 60076-6:2015

uk: Силові трансформатори. Частина 6. Реактори
(EN 60076-6:2008, IDT)

З наданням чинності від 2016–01–01

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

CONTENTS

INTRODUCTION

1 Scope

2 Normative references

3 Terms and definitions

3.1 Types of reactor

3.2 Other definitions

4 Symbols and abbreviations

5 Service conditions

5.1 General

5.2 Seismic conditions

6 Design, testing, tolerances and application

7 Shunt reactors

7.1 General

7.2 Design

7.3 Terms and definitions

7.4 Rating

7.5 Temperature rise

7.6 Insulation level

7.7 Rating plates

7.8 Tests

7.9 Tolerances

8 Current-limiting reactors and neutral-earthing reactors 

8.1 General

8.2 Design

8.3 Terms and definitions

8.4 Rating

8.5 Ability to withstand rated thermal and rated mechanical short-circuit current

8.6 Temperature rise

8.7 Insulation level

8.8 Rating plates

8.9 Tests

8.10 Tolerances

9 Filter, damping and discharge reactors associated with capacitors

9.1 General

9.2 Design

9.3 Terms and definitions

9.4 Rating

9.5 Ability to withstand rated thermal and rated mechanical short-circuit current

9.6 Ability to withstand inrush or discharge current

9.7 Temperature rise

9.8 Insulation level

9.9 Rating plates

9.10 Tests

9.11 Tolerances

10 Earthing transformers (neutral couplers)

10.1 General

10.2 Design

10.3 Terms and definitions

10.4 Rating

10.5 Ability to withstand the rated short-time neutral current

10.6 Temperature rise

10.7 Insulation level

10.8 Rating plates

10.9 Tests

10.10 Tolerances

11 Arc-suppression reactors

11.1 General

11.2 Design

11.3 Terms and definitions

11.4 Rating

11.5 Temperature rise

11.6 Insulation level

11.7 Rating plates

11.8 Tests

12 Smoothing reactors

12.1 General

12.2 Design

12.3 Terms and definitions

12.4 Rating

12.5 Temperature rise

12.6 Insulation levels

12.7 Rating plates

12.8 Tests

12.9 Tolerances

Annex A (informative) Information on shunt reactor switching and on special applications

Annex B (informative) Magnetic characteristic of reactors

Annex C (informative) Mutual reactance, coupling factor and equivalent reactances of three-phase reactors

Annex D (informative) Temperature correction of losses for liquid-immersed gapped- core and magnetically-shielded air-core reactors

Annex E (normative) Turn-to-turn overvoltage test for dry-type reactors

Annex F (informative) Short-circuit testing

Annex G (informative) Resistors – Characteristics, specification and tests

Bibliography

Annex ZA (normative) Normative references to international publications with their corresponding European publications