ДСТУ EN 60352-2:2022 Непаяные соединения. Часть 2. Гофрированные соединения. Общие требования, методы испытаний и практические указания (EN 60352-2:2006, IDT; IEC 60352-2:2006, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ДСТУ EN 60352-2:2022
(EN 60352-2:2006, IDT; IEC 60352-2:2006, IDT)

Непаяні з’єднання. Частина 2. Гофровані з’єднання.
Загальні вимоги, методи випробувань і практичні вказівки

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

INTRODUCTION

1 Scope and object

2 Normative references

3 Terms and definitions

4 Requirements

4.1 Workmanship

4.2 Tools

4.3 Crimp barrels

4.4 Wires

4.5 Crimped connections

5 Tests

5.1 Testing

5.2 Test methods and test requirements

5.3 Test schedules

6 General information on crimp connections

6.1 Advantages of crimped connections

6.2 Current-carrying capacity considerations

7 Tool information

8 Crimp barrel information

8.1 General

8.2 Materials

8.3 Surface finishes

8.4 Shapes of crimped connections

9 Wire information

9.1 General

9.2 Materials

9.3 Surface finishes

9.4 Stripping information

10 Connection information

10.1 General

10.2 Crimped connections made with more than one wire in a crimp barrel

10.3 Dimensions after crimping

10.4 Materials

11 Crimping process

11.1 Crimping of contacts with open crimp barrel

11.2 Crimping of contacts with open crimp barrel, loose piece contacts

11.3 Processing instruction

12 Correct crimped connections (additional information)

12.1 Correct crimped connections of contacts with an open crimp barrel

12.2 Measuring of crimp height/depth

12.3 Insulation grip

13 Faults with crimped contacts having open barrels

14 General information about crimp type contacts as part of a multipole connector

14.1 Insertion of crimped contacts into the contact cavities of the connector housing

14.2 Removal of inserted contacts

14.3 Mounting and bending of wire bundles/cables with crimped contacts

14.4 Mating and unmating of multipole connectors with crimped contacts

15 Final remarks

Annex ZA (normative) Normative references to international publications with their corresponding European publications

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online