ДСТУ EN IEC 62093:2022 Оборудование для преобразования энергии фотоэлектрической системы. Аттестация проекта и одобрение типа (EN IEC 62093:2022, IDT; IEC 62093:2022, IDT)

ДСТУ EN IEC 62093:2022
(EN IEC 62093:2022, IDT; IEC 62093:2022, IDT)

Обладнання для перетворення енергії фотоелектричної системи. Атестація проєкту та схвалення типу

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

1 Scope

2 Normative references

3 Terms and definitions

4 Sampling

5 Testing requirements

5.1 General

5.2 Environmental service conditions

5.2.1 General

5.2.2 Outdoor

5.2.3 Indoor, unconditioned

5.2.4 Indoor, conditioned

5.3 Test sequences

5.3.1 General

5.3.2 Test conditions for Category 1 PCE (Module level power electronics)

5.3.3 Test conditions for Category 3 PCE-large scale and Category 4 PCE- central large scale power conversion equipment

5.3.4 Test conditions for Category 4 PCE (large central power conversion equipment)

5.4 General testing requirements

5.4.1 Installation of testing sample

5.4.2 Peripherals

5.4.3 Connectors and wiring

5.4.4 Measuring instruments and monitoring equipment

5.4.5 Electrical power sources

5.4.6 Electrical loads

5.4.7 Earthing terminals

5.4.8 Controls

5.5 Pass criteria

6 Test procedures

6.1 Visual inspection

6.1.1 Purpose

6.1.2 Apparatus

6.1.3 Procedure

6.1.4 Requirements

6.2 Characterization of operating performance

6.2.1 Purpose

6.2.2 Apparatus

6.2.3 Procedure

6.2.4 Restrictions and exceptions

6.2.5 Requirements

6.3 Functionality test

6.3.1 Purpose

6.3.2 Apparatus

6.3.3 Procedure

6.3.4 Restrictions and exceptions

6.3.5 Requirements

6.4 Voltage (dielectric strength) test

6.4.1 Purpose

6.4.2 Apparatus

6.4.3 Procedure

6.5 Bus link capacitor thermal test

6.5.1 Purpose

6.5.2 Apparatus

6.5.3 Procedure

6.5.4 Restrictions and exceptions

6.5.5 Requirements

6.6 Power transistor module thermal test

6.6.1 Purpose

6.6.2 Apparatus

6.6.3 Procedure

6.6.4 Restrictions and exceptions

6.6.5 Requirements

6.7 Humidity freeze test

6.7.1 Purpose

6.7.2 Apparatus

6.7.3 Procedure

6.7.4 Restrictions and exceptions

6.7.5 Final measurements

6.7.6 Requirements

6.8 Thermal cycling test

6.8.1 Purpose

6.8.2 Apparatus

6.8.3 Procedure

6.8.4 Restrictions and exceptions

6.8.5 Final measurements

6.8.6 Requirements

6.9 Damp heat test

6.9.1 Purpose

6.9.2 Apparatus

6.9.3 Procedure

6.9.4 Restrictions and exceptions

6.9.5 Final measurements

6.9.6 Requirements

6.10 Dry heat test

6.10.1 Purpose

6.10.2 Apparatus

6.10.3 Procedure

6.10.4 Restrictions and exceptions

6.10.5 Final measurements

6.10.6 Requirements

6.11 UV weathering test

6.11.1 Purpose

6.11.2 Apparatus

6.11.3 Procedure

6.11.4 Restrictions and exceptions

6.11.5 Requirements

7 Optional tests

7.1 General

7.2 Rain intrusion test

7.2.1 Purpose

7.2.2 Apparatus

7.2.3 Procedure

7.2.4 Restrictions and exceptions

7.2.5 Final measurements

7.2.6 Requirements

7.3 Wind driven rain test

7.3.1 Purpose

7.3.2 Apparatus

7.3.3 Procedure

7.3.4 Restrictions and exceptions

7.3.5 Final measurements

7.3.6 Requirements

7.4 Dust test

7.4.1 Purpose

7.4.2 Apparatus

7.4.3 Procedure

7.4.4 Exceptions and restrictions

7.4.5 Requirements

7.5 Shipping vibration test

7.5.1 Purpose

7.5.2 Apparatus

7.5.3 Procedure

7.5.4 Restrictions and exceptions

7.5.5 Final measurements

7.5.6 Requirements

7.6 Shock test

7.6.1 Purpose

7.6.2 Apparatus

7.6.3 Procedure

7.6.4 Restrictions and exceptions

7.6.5 Final measurements

7.6.6 Requirements

7.7 Salt mist test

7.7.1 Purpose

7.7.2 Apparatus

7.7.3 Procedure

7.7.4 Restrictions and exceptions

7.7.5 Final measurements

7.7.6 Requirements

7.8 Mixed gas corrosion test

7.8.1 General

7.8.2 Apparatus

7.8.3 Procedure

7.8.4 Restrictions and exceptions

7.8.5 Final measurements

7.8.6 Requirements

7.9 Ammonia corrosion test

7.9.1 Purpose

7.9.2 Apparatus

7.9.3 Procedure

7.9.4 Final measurements

7.9.5 Requirements

8 Report

Annex A (normative) Specification of tests performed for reporting

Bibliography