ДСТУ EN 50633:2022 Железнодорожный транспорт. Стационарные установки. Основные положения защиты систем электрической тяги переменного и постоянного тока (EN 50633:2016, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ДСТУ EN 50633:2022
(EN 50633:2016, IDT)

Залізничний транспорт. Стаціонарні установки.
Основні положення захисту систем електричної тяги змінного та постійного струму

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

1 Scope

2 Normative references

3 Terms and definitions

4 System to be protected

4.1 Description

4.2 Interfaces

4.2.1 Infeed

4.2.2 Rolling stock

4.2.3 Electrical installations fed by the electric traction system

5 General principles

5.1 Objectives

5.2 System requirements

5.2.1 General

5.2.2 Protection reliability methods

5.2.3 Load discrimination

5.2.4 Speed of protection

5.2.5 Selectivity

5.2.6 Economic feasibility

5.3 Description of the protection system

5.4 Fault and abnormal conditions

5.5 Protection concept

6 Specific requirements of different systems

6.1 General

6.2 AC systems

6.2.1 Power conversion infeed

6.2.2 Busbar infeed

6.2.3 Line feeder

6.2.4 Switching station feeder

6.2.5 Autotransformer

6.3 DC systems

6.3.1 Power conversion infeed

6.3.2 DC Busbar infeed

6.3.3 Line feeder

6.3.4 Switching station feeder

6.3.5 Frame leakage protection

6.4 Overview of protection reliability methods

7 Limitations and residual risks

8 Conformity assessment

Annex A (informative) Examples of protection schemes

A.1 General

A.2 Description of the structure of the protection scheme examples

A.3 Protection scheme examples

Annex B (informative) Example of a Protection Concept for a 25 kV line section

B.1 Introduction

B.2 Protection Concept

B.3 Interfaces

B.4 Fault Conditions

B.5 Clearance times

B.6 Main protection functions

B.7 Reliability methods

B.8 Selectivity

B.9 Grading time requirements

B.10 Coordination requirements

B.11 Maintenance requirements

B.12 Protection device structure

B.13 Operating sequence

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online