ДСТУ EN ISO 11296-4:2022 Системы пластиковых трубопроводов для реконструкции безнапорных подземных дренажных и канализационных сетей. Часть 4. Облицовка затвердевшими трубами (EN ISO 11296-4:2018, IDT; ISO 11...

ДСТУ EN ISO 11296-4:2022
(EN ISO 11296-4:2018, IDT; ISO 11296-4:2018, IDT)

Системи пластикових трубопроводів для реконструкції підземних безнапірних дренажних і каналізаційних мереж. Частина 4. Облицювання затверділими трубами

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

Endorsement notice

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

3.1 General terms

3.2 Techniques

4 Symbols and abbreviated terms

4.1 Symbols

4.2 Abbreviated terms

5 Pipes at the "M" stage

5.1 Materials

5.2 General characteristics

5.3 Material characteristics

5.4 Geometric characteristics

5.5 Mechanical characteristics

5.6 Physical characteristics

5.7 Jointing

5.8 Marking

6 Fittings at the "M" stage

6.1 Materials

6.2 General characteristics

6.3 Material characteristics

6.4 Geometric characteristics

6.5 Mechanical characteristics

6.6 Physical characteristics

6.7 Jointing

6.8 Marking

7 Ancillary components

8 Fitness for purpose of the installed lining system at the "I" stage

8.1 Materials

8.2 General characteristics

8.3 Material characteristics

8.4 Geometric characteristics

8.5 Mechanical characteristics

8.6 Physical characteristics

8.7 Additional characteristics

8.8 Sampling

9 Installation practice

9.1 Preparatory work

9.2 Storage, handling and transport of pipe components

9.3 Equipment

9.4 Installation

9.5 Process-related inspection and testing

9.6 Lining termination

9.7 Reconnections to existing pipeline system

9.8 Final inspection and testing

9.9 Documentation

Annex A (informative) CIPP components and their functions

Annex B (normative) Cured-in-place pipes — Determination of short-term flexural properties

Annex C (normative) Cured-in-place pipes — Determination of long-term flexural modulus under dry or wet conditions

Annex D (normative) Cured-in-place pipes — Determination of long-term flexural strength under dry, wet or acidic conditions (stress corrosion test)

Bibliography