ДСТУ CEN/TS 17216:2022 Строительные изделия. Оценка выделения опасных веществ. Определение концентрации активности радия-226, тория-232 и калия-40 в строительных изделиях посредством полупроводниковой гамма-с...

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ДСТУ CEN/TS 17216:2022
(CEN/TS 17216:2018, IDT)

Будівельні вироби. Оцінювання виділення небезпечних речовин.
Визначення концентрації активності радію-226, торію-232 і калію-40 у будівельних
виробах за допомогою напівпровідникової гамма-спектрометрії

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and abbreviations

5 Principles of the test method

6 Sampling and sample preparation

6.1 Sampling hierarchy

6.2 Sampling and sub-sampling

6.2.1 General

6.2.2 Sub-sampling from the laboratory sample

6.3 Test specimen/test portion preparation

6.3.1 Apparatus and ancillary materials

6.3.2 Preparation of test portion and test specimen

7 Test procedure

7.1 General

7.2 Measurement

7.2.1 Apparatus, software and calibration standards

7.2.2 Initial calibrations

7.2.3 Measurements

8 Processing the test data

8.1 General

8.2 Analysis of counting spectrum

8.2.1 Identification of photopeaks

8.2.2 Corrected counting rate

8.3 Calculating activity concentration

8.3.1 Activity in the test specimen

8.3.2 Average activity per radionuclide

8.4 Standard uncertainty

8.4.1 Internal uncertainty

8.4.2 External uncertainty

8.4.3 Relative uncertainty

8.4.4 Total uncertainty per radionuclide

8.5 Decision threshold

8.6 Detection limit

9 Test report

Annex A (normative) Method for the determination of the radon-tightness of a test specimen container

Annex B (normative) Preparation of standardized calibration sources

Annex C (normative) Method for the determination of the activity concentration in a composite product

Annex D (informative) Complementary photopeaks to verify the activity concentration in the test specimen

Annex E (informative) Method for the determination of the corrected number of pulses in a photopeak (only to be used for completely stand-alone single peaks)

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online