ДСТУ EN 15001-1:2015 Газовая инфраструктура. Монтаж газопроводов с рабочим давлением более 0,5 бар для промышленных установок и более 5 бар для промышленных и непромышленных установок. Часть 1. Подробные треб...

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(   
(ДП «УкрНДНЦ»))

Наказ від 05.11.2015 № 145

EN 15001-1:2009

Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar
for industrial installations and greater than 5 bar for industrial and non-industrial installations -
Part 1: Detailed functional requirements for design, materials, construction, inspection and testing

прийнято як національний стандарт
методом «підтвердження» за позначенням
 

ДСТУ EN 15001-1:2015
(EN 15001-1:2009, IDT)

Газова інфраструктура. Монтаж газопроводів з робочим тиском понад 0,5 бар для
промислових установок і понад 5 бар для промислових і непромислових установок.
Частина 1. Детальні вимоги до проектування, матеріалів, конструкції, контролю та випробування

З наданням чинності від 2016–01–01

Contents

Foreword

1 Scope

2 Normative references

3 Terms and definitions

3.1 Definitions relating to pressure

3.2 Definitions relating to the gas installation

3.3 Definition relating to means of isolation

3.4 Definitions relating to jointing methods

3.5 Definitions relating to components

3.6 Definitions relating to tests

3.7 Definition relating to testing and inspection

3.8 Definitions relating to assembly processes for metallic materials

3.9 Definitions relating to pressure regulating and metering

4 General

4.1 Quality system

4.2 Selection of materials

4.3 Protection against hazards

4.4 Accommodation and location of gas pressure regulating and metering systems, gas pressure compressors and gas mixing systems

5 Materials

5.1 Standards and specifications for pipes and pipe fittings

5.2 Ancillaries

5.3 Gas pressure regulating and safety systems

6 Design of pipework

6.1 General

6.2 Layout

6.3 Dimensioning

6.4 Pressure and wall thickness

6.5 Safety engineering

6.6 Detail engineering

6.7 Hot tapping carbon steel pipe

7 Design of pressure control systems

7.1 General

7.2 Pressure regulating system

7.3 Instrumentation

7.4 Permanent bypasses

7.5 Construction requirements

7.6 Low gas temperature

7.7 Gas compressors

7.8 Safety systems

8 Construction

8.1 Identification of the installation

8.2 External hazards

8.3 Gas pipework passing through exterior walls

8.4 Identification of pipework

8.5 Specifications and requirements for joints

8.6 Joint suitability

8.7 Connections

8.8 Corrosion protection

8.9 Handling and installation of pipework

8.10 Bending of pipes

8.11 Welding of supports and anchor points to carbon steel pipework

8.12 Installation of pressure regulating systems

9 Documentation, inspection and testing

9.1 General

9.2 Documentation

9.3 Inspection

9.4 Testing

Annex A (informative) Example schematic diagrams of installation options for gas pressure regulating systems

Annex B (informative) Examples of methods for testing

Annex C (informative) Flammable gases mixing systems

Annex D (informative) Examples of supports

Annex E (normative) Materials

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC

Bibliography