ДСТУ IEC 60068-2-17:2015 Испытания на воздействие внешних факторов. Часть 2-17. Испытания. Испытания Q: Уплотнение (IEC 60068-2-17:1994, IDT)

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(   
(ДП «УкрНДНЦ»))

Наказ від 12.02.2016 № 34

IEC 60068-2-17:1994

Environmental testing - Part 2: Tests - Test Q: Sealing

прийнято як національний стандарт
методом «підтвердження» за позначенням
 

ДСТУ IEC 60068-2-17:2015
(IEC 60068-2-17:1994, IDT)

Випробування на вплив зовнішніх чинників. Частина 2-17.
Випробування. Випробування Q: Ущільнення

З наданням чинності від 2016–01–01

CONTENTS

FOREWORD

Survey of sealing tests

Clause

1 Definitions

2 Test Qa: Sealing of bushes, spindles and gaskets

2.1 Object

2.2 Scope

2.3 General description of the test

2.4 Initial measurements

2.5 Conditioning

2.6 Final measurements

2.7 Information to be given in the relevant specification

3 Test Qc: Container sealing, gas leakage

3.1 Object

3.2 Scope

3.3 General description of the test

3.4 Test Method 1

3.5 Test Method 2

3.6 Test Method 3

3.7 Information to be given in the relevant specification

4 Test Qd: Container sealing, seepage of filling liquid

4.1 Object

4.2 Scope

4.3 General description of the test

4.4 Severities

4.5 Preconditioning

4.6 Initial measurements

4.7 Conditioning

4.8 Final measurements

4.9 Information to be given in the relevant specification

5 Test Qf: Immersion

5.1 Object

5.2 General description of the test

5.3 Initial measurements

5.4 Preconditioning

5.5 Conditioning

5.6 Recovery

5.7 Final measurements

5.8 Information to be given in the relevant specification

6 Test Qk: Sealing tracer gas method with mass spectrometer

6.1 Object

6.2 Scope

6.3 General description of the test

6.4 Test method 1 (for specimens not filled with helium during manufacturing)

6.5 Test Method 2 (for specimens filled with helium during manufacturing or for the requirements of this test)

6.6 Test Method 3 (applicable to specimens to be mounted on bulkheads or panels)

6.7 Information to be given in the relevant specification

7 Test 01: Bomb pressure test

7.1 Object

7.2 Scope

7.3 General description of the test

7.4 Initial measurements

7.5 Conditioning

7.6 Recovery

7.7 Final measurements

7.8 Information to be given in the relevant specification

8 Test Qm: Tracer gas sealing test with internal pressurization

8.1 Object

8.2 Scope

8.3 General description of the test

8.4 Pre-conditioning

8.5 Conditioning

8.6 Information to be given in the relevant specification

9 Test Qy: Pressure rise sealing test

9.1 Object

9.2 Scope

9.3 General description of the test

9.4 Calibration of the test equipment

9.5 Information to be given in the relevant specification

Annexes

A Example of a test chamber for Test Qa

B Guidance for Test Qc

C Guidance for Test Qd

D Interrelation of test parameters for Test Qk

E Guidance for Test Qk

F Guidance for Test QI

G Guidance for Test Qm

H Guidance for Test Qy