ДСТУ EN 403:2017 Средства индивидуальной защиты органов дыхания для самоспасения. Фильтровальные устройства с капюшоном для самоспасения во время пожара. Требования, испытания, маркировка (EN 403:2004, IDT)
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство «Український науково-дослідний інавчальний центр
проблем стандартизації сертифікаціїта якості»
(
(ДП «УкрНДНЦ»))
Наказ від 26.12.2017 № 467
EN 403:2004
Respiratory protective devices for self-rescue —
Filtering devices with hood for escape from fire —
Requirements, testing, marking
прийнято як національний стандарт
методом «підтвердження» за позначенням
ДСТУ EN 403:2017
(EN 403:2004, IDT)
Засоби індивідуального захисту органів дихання для саморятування.
Фільтрувальніпристроїз капюшоном для саморятування під час
пожежі
Вимоги, випробування, маркування
З наданням чинності від 2018–2–1
Contents
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Classification
6 Requirements
6.1 General
6.2 Ergonomics
6.3 Design
6.4 Materials
6.5 Mass
6.6 Conditioning
6.7 Connections
6.8 Packaging
6.9 Practical performance
6.10 Leakage
6.10.1 Inward leakage excluding filter penetration (breathing zone)
6.10.2 Leakage into ocular zone
6.11 Filter
6.11.1 Gas capacity
6.11.2 Filter penetration
6.12 Valves
6.13 Breathing resistance
6.14 Flammability
6.15 Carbon dioxide content of inhalation air
6.16 Head harness
6.17 Vision
6.17.1 Visor
6.17.2 Impairment of vision
6.17.3 Field of vision
6.18 Sealing
6.19 Integrity of filtering smoke hood at high carbon monoxide concentrations
6.20 Ingress of humidity
6.21 Temperature of inhaled air
6.22 Communication
7 Testing
7.1 General
7.2 Nominal values and tolerances
7.3 Visual inspection
7.4 Conditioning
7.4.1 General
7.4.2 Mechanical strength
7.4.3 Impact
7.4.4 Resistance of packaging to puncture and tear
7.4.5 Temperature
7.4.6 Pressure changes
7.5 Practical performance test
7.5.1 General
7.5.2 Exercises
7.6 Leakage
7.6.1 Inward leakage excluding filter penetration (breathing zone)
7.6.2 Leakage into ocular zone
7.7 Gas capacity
7.7.1 General
7.7.2 Carbon monoxide test
7.7.3 Other test gases
7.8 Filter penetration
7.9 Breathing resistance
7.10 Flammability
7.10.1 Test specimen
7.10.2 Apparatus
7.10.3 Procedure
7.11 Carbon dioxide content of the inhalation air
7.12 Connections
8 Marking
8.1 General
8.2 Filtering smoke hood or package
8.3 Package
9 Information supplied by the manufacturer
Annex A (informative) Method for the determination of wet bulb temperature of the inhaled air
Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives
Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».