ДСТУ ETSI EN 300 444:2019 Цифровая усовершенствованная система беспроводного доступа (DECT). Профиль общего доступа (ETSI EN 300 444 V2.5.1 (2017-10), IDT)

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 22.08.2019 № 273

ETSI EN 300 444 V2.5.1 (2017-10)

DDigital Enhanced Cordless
Telecommunications (DECT);
Generic Access Profile (GAP)

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ ETSI EN 300 444:2019
(ETSI EN 300 444 V2.5.1 (2017-10), IDT)

Цифрова вдосконалена система
безпроводового доступу (DECT).
Профіль загального доступу

З наданням чинності від 2019-09-01

 

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Intellectual Property Rights

Foreword

Modal verbs terminology

1 Scope

2 References

2.1 Normative references

2.2 Informative references

3 Definitions, symbols and abbreviations

3.1 Definitions

3.2 Symbols

3.3 Abbreviations

4 Feature definitions

4.0 General

4.1 NetWorK (NWK) features

4.2 Speech coding and audio features

4.3 Application features

5 Service definitions

5.0 General

5.1 DLC service definitions

5.2 MAC service definitions

6 Inter-operability requirements

6.1 General

6.2 NWK features

6.3 DLC services

6.4 MAC services

6.5 PHysical Layer (PHL) services

6.6 Application features

6.7 Speech coding and audio features

6.8 Feature/service to procedure mapping

6.9 General requirements

7 Procedure description

8 NWK layer procedures

8.0 General

8.1 Summary of outgoing call messages, normal cases

8.2 Outgoing call request

8.3 Overlap sending

8.4 Outgoing call proceeding

8.5 Outgoing call confirmation

8.6 Outgoing call connection

8.7 Normal call release

8.8 Abnormal call release

8.9 Partial release

8.10 Sending keypad information

8.11 Summary of incoming call related messages, normal cases

8.12 Incoming call request

8.13 Incoming call confirmation

8.14 PT alerting

8.15 Incoming call connection

8.16 Display

8.17 Terminal capability indication

8.18 Internal call setup

8.19 Internal call keypad

8.20 Service call setup

8.21 Service call keypad

8.22 Identification of PP

8.23 Authentication of FT using DSAA

8.24 Authentication of PP using DSAA

8.25 Authentication of user using DSAA

8.26 Incrementing the ZAP value

8.27 Storing the DCK

8.28 Location registration

8.29 Location update

8.30 Obtaining access rights

8.31 FT terminating access rights

8.32 Key allocation

8.33 Cipher-switching initiated by FT using DSC

8.34 Cipher-switching initiated by PT using DSC

8.35 Indirect FT initiated link establishment

8.36 Direct PT initiated link establishment

8.37 Link release "normal"

8.38 Link release "abnormal"

8.39 Link release "maintain"

8.40 Enhanced FT initiated U-plane connection

8.41 Calling Line Identification Presentation (CLIP) Indication

8.42 Calling Name Identification Presentation (CNIP) Indication

8.43 Internal Call Calling Line Identification Presentation (CLIP)

8.44 Internal Call Calling Name Identification Presentation (CNIP)

8.45 Enhanced security procedures

9 DLC layer procedures

9.1 Class A link establishment

9.2 Class A Acknowledged Information transfer

9.3 Class A link release

9.4 Class A link re-establishment

9.5 C_S channel fragmentation and recombination

9.6 Normal broadcast

9.7 Class A basic connection handover

9.8 Encryption switching

 9.9 U-plane class 0/min delay

9.10 FU1 frame operation

10 MAC layer procedures

10.1 General

10.2 Downlink broadcast

10.3 Paging broadcast

10.4 Setup of basic connection, basic bearer setup (A-field)

10.5 Connection/bearer release

10.7 Connection handover request

10.8 C_S channel data

10.9 Q2 bit setting

10.10 RFPI handshake

10.11 Antenna diversity

10.12 Sliding collision

10.13 Encryption process - initialization and synchronization

10.14 Encryption mode control

10.15 Handover encryption process

10.16 Extended frequency allocation

10.17 Re-keying

10.18 Early Encryption

10.19 AES/DSC2 Encryption

11 Physical Layer (PHL) requirements

11.1 General

11.2 Minimum Normal Transmit Power (NTP)

11.3 Radio receiver sensitivity

11.4 Z-field

11.5 Sliding collision detection

11.6 Physical channel availability

11.7 Synchronization window

12 Requirements regarding the speech transmission

12.1 General

12.2 User controlled volume control

13 Management procedures

13.1 Management of MM procedures

13.2 Location registration initiation

13.3 Assigned individual TPUI management

13.4 PMID management

13.5 DCK management

13.6 Broadcast attributes management

13.7 Storage of subscription related data

14 Application procedures

14.1 Subscription control

14.2 AC to bitstring mapping

14.3 Manual entry of the PARK

14.4 Terminal Identity number assignment in mono cell system

Annex A (informative): PP locking procedure for on-air subscription

Annex B (informative): Tones, progress indicator and U-plane connection

Annex C (normative): Synchronization requirements for fixed parts

Annex D (informative): Change history

History