ДСТУ EN IEC 62485-6:2022 Вимоги щодо безпеки для вторинних батарей і батарейних установок. Частина 6. Безпечна експлуатація літій-іонних батарей у тягових системах (EN IEC 62485-6:2021, IDT; IEC 62485-6:2021,...



ДСТУ EN IEC 62485-6:2022
(EN IEC 62485-6:2021, IDT; IEC 62485-6:2021, IDT)

Вимоги щодо безпеки для вторинних батарей і батарейних установок.
Частина 6. Безпечна експлуатація літій-іонних батарей у тягових системах

 

 
   
 
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

1 Scope

2 Normative references

3 Terms and definitions

4 Protection against electric shock by the battery and charger

4.1 General

4.2 Basic protection and fault protection

4.3 Basic protection and fault protection when discharging the traction battery on the vehicle (battery disconnected from charger/mains)

4.4 Basic protection and fault protection when charging the traction battery

5 Prevention of short-circuits and protection from other effects of electric current

5.1 Cables and connectors

5.2 Protective measures during maintenance

5.3 Battery insulation

6 Provisions against hazards

6.1 General

6.2 Charging modes

6.3 Temperature influence on the charge voltage and limiting of charge current

6.4 Overcharging or overdischarging under fault conditions

6.5 Prevention of electrostatic discharges when working with batteries

7 Provision against hazards by chemical substances

7.1 General

7.2 Initial actions in case of hazardous chemical release

7.3 Eye or skin contact

7.4 Swallowing

7.5 Respiratory tract

7.6 Burns

8 Battery containers and enclosures

9 Battery change

10 Battery peripheral equipment/accessories

10.1 Battery management system

10.2 Thermal management systems and series installation

10.3 Connectors (plugs/sockets)

11 Charge current requirements

11.1 Peak voltage/current by charging

11.2 Superimposed ripple current

11.3 Maximum ripple current

12 Identification labels, warning notices and instructions for use, installation and maintenance

12.1 General

12.2 Warning labels

12.3 Identification label

12.4 Instructions

12.5 Other labels

13 Transportation, storage, disposal and environmental aspects

13.1 Packing and transport

13.2 Disassembly, disposal, and recycling of batteries

13.3 Storage

14 Inspection and monitoring

15 EMC for traction application

Annex A (informative) Cell behaviour inside and outside of operating region

Annex В (normative) Electromagnetic compatibility (EMC)

Bibliography