ДСТУ EN 50436-1:2016 Блокіратори алкогольні. Методи випробування та технічні вимоги. Частина 1. Прилади, які застосовують у рамках програм для порушників правил щодо заборони керування транспортним засобом у...

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ


ДСТУ EN 50436-1:2016
(EN 50436-1:2014, IDT)

Блокіратори алкогольні. Методи випробування та технічні вимоги.
Частина 1. Прилади, які застосовують у рамках програм для порушників правил
щодо заборони керування транспортним засобом у стані алкогольного сп’яніння

 

 
   
 
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 General requirements

4.1 Blocking and not-blocking

4.2 Influence on the vehicle motor

4.3 Tampering

4.4 Concentration limit

4.5 Mouthpiece

4.6 Readiness

4.7 Data memory, download and evaluation

4.8 Retests

4.9 Recall

4.10 Override function

4.11 Combination with other systems

4.12 Communication integrity

4.13 Wireless communication

4.14 Basic functionality

5 General test methods

5.1 Samples

5.2 Preparation of alcohol interlock before testing

5.3 Sequence of tests

5.4 Normal conditions for tests

5.5 Functional test

6 Electrical tests

6.1 General

6.2 Supply voltage

6.3 Excess supply voltage

6.4 Short-circuit

6.5 Reversed polarity

6.6 Low-power-consumption state

6.7 Electrical disturbances (not applicable to parts of the alcohol interlock integrated into other vehicle systems)

6.8 Electrostatic discharge

6.9 Electromagnetic compatibility

6.10 Functional test under normal conditions

7 Calibration curve

8 Durability tests

8.1 Temperature cycles

8.2 Condensed water

8.3 Vibrations

8.4 Drop test

9 Environmental tests

9.1 General

9.2 Temperature

9.3 Temperature and supply voltage

9.4 Temperature and humidity

9.5 Warm-up time

9.6 Pressure

9.7 Protection by enclosure

10 Breath sample

10.1 Volume

10.2 Flow

10.3 Exhalation time

10.4 Response time

11 Analytical specificity

11.1 Test gases

11.2 Cigarette smoke

12 Manipulation and circumvention

12.1 General

12.2 Pressurised air

12.3 Providing of the sample with a mouthpiece attached

12.4 Providing of the sample without a mouthpiece attached

12.5 Obstruction of the mouthpiece

12.6 Filter

12.7 Condensation

12.8 Water

12.9 Putting out of service

12.10 Removal of handset

12.11 Bypass

13 Timer

13.1 Start period

13.2 Restart period

13.3 Service reminder

13.4 Calibration interval

14 Long term behaviour

15 Instructions

15.1 Instructions for installation (applicable to alcohol interlocks for aftermarket installation only)

15.2 Instructions for use

15.3 Instructions for servicing the alcohol interlock

16 Test report

17 Labelling and marking

Annex A (normative) Description of events

Annex B (informative) Performance testing

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online