ДСТУ EN 61482-1-2:2022 Работа под напряжением. Защитная одежда от термической опасности электрической дуги. Часть 1-2. Методы испытаний. Метод 2. Определение класса дуговой защиты материала и одежды с помощью...

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ДСТУ EN 61482-1-2:2022
(EN 61482-1-2:2014, IDT; IEC 61482-1-2:2014, IDT)

Робота під напругою.
Захисний одяг від термічної небезпеки електричної дуги.
Частина 1-2. Методи випробувань. Метод 2. Визначення
класу дугового захисту матеріалу та одягу за допомогою
обмеженої та спрямованої дуги (бокс-тест)

 
 
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

CONTENTS

1 Scope

2 Normative references

3 Terms, definitions and symbols

3.1 Terms and definitions

3.2 Symbols and units used in this document

4 Principle of the test method

4.1 Material box test procedure

4.2 Garment box test procedure

5 Significance and use of the test method

6 Test apparatus

6.1 Test apparatus and test box

6.2 Material box test procedure

6.3 Garment box test procedure

6.4 Electric supply and electrodes

6.5 Electric test arc characteristics

6.6 Measurement and data acquisition system

7 Operator safety

8 Specimen preparation

8.1 Description of the test specimens

8.2 Pre-treatment by cleaning

8.3 Pre-conditioning of the test specimens

9 Calibration

9.1 Data acquisition system pre-calibration

9.2 Calorimeter calibration check

9.3 Arc exposure calibration

9.4 Calibration of the electric test circuit and testing

9.5 Confirmation of test apparatus setting

9.6 Preparing and conditioning of the box

10 Apparatus care and maintenance

10.1 Surface reconditioning of the sensors

10.2 Care of test plate and mannequin

10.3 Care of electrodes

11 Test procedures

11.1 Test parameters

11.2 Number of tests

11.3 Test conditions and initial temperature

11.4 Specimen mounting

11.5 Specimen description

12 Interpretation of results

12.1 Heat transfer

12.2 Visual inspection

12.3 Test result

13 Test report

Annex A (informative) Precision of the test method

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online