ДСТУ EN 60146-1-1:2022 Полупроводниковые преобразователи. Общие требования и линейно-коммутируемые преобразователи. Часть 1-1. Спецификация основных требований (EN 60146-1-1:2010, IDT; IEC 60146-1-1:2009, IDT...

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ДСТУ EN 60146-1-1:2022
(EN 60146-1-1:2010, IDT; IEC 60146-1-1:2009, IDT)

Напівпровідникові перетворювачі. Загальні вимоги та лінійно-комутовані перетворювачі. Частина 1-1. Специфікація основних вимог




 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

1 Scope and object

2 Normative references

3 Terms and definitions

3.1 Semiconductor devices and combinations

3.2 Arms and connections

3.3 Controllability of converter arms and quadrants of operation (on d.c. side)

3.4 Commutation, quenching and commutation circuitry

3.5 Commutation characteristics

3.6 Rated values

3.7 Specific voltages, currents and factors

3.8 Cooling

3.9 Service conditions tolerances and electromagnetic compatibility

3.10 Harmonic distortion

3.11 Definitions related to insulation co-ordination

4 Operation of semiconductor power equipment and valve devices

4.1 Classification

4.2 Principal letter symbols and subscripts

4.3 Basic operation of semiconductor converters

5 Service conditions

5.1 Code of identification for cooling method

5.2 Environmental conditions

5.3 Characteristics of the load

5.4 Service condition tolerances

6 Power conversion equipment and assemblies

6.1 Electrical connections

6.2 Calculation factors

6.3 Electromagnetic compatibility

6.4 Rated values

6.5 Duty classes

6.6 Markings

7 Tests for valve device assemblies and power conversion equipment

7.1 General

7.2 Insulation tests

7.3 Functional test

7.4 Losses, temperature and power factor

7.5 Auxiliaries and control

7.6 EMC tests

7.7 Measurement of audible noise and additional tests

7.8 Tolerances

Annex A (normative) Harmonics and interhamonics

Annex B (informative) Electrical environment - Short-circuit ratio

Annex C (normative) Protection against electric shock and energy hazards

Bibliography

Index of definitions

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online