ДСТУ EN 50559:2022 Электрическое отопление помещений, теплый пол, функциональные характеристики. Определение, метод испытания, размеры и символы формул (EN 50559:2013/A1:2020, IDT). С Изменением № 1:2022



ДСТУ EN 50559:2022
(EN 50559:2013, IDT)

Електричне опалення приміщень, тепла підлога, функційні характеристики.
Визначення, метод випробування, розміри та символи формул

 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

 

 

 

ДСТУ EN 50559:2022
(EN 50559:2013, IDT)/Зміна № 1:2022
(EN 50559:2013/A1:2020, IDT)

Електричне опалення приміщень, тепла підлога, функційні характеристики.
Визначення, метод випробування, розміри та символи формул

 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

 

Contents

Forewords

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Method of testing for the determination of characteristics of performance

4.1 General

4.2 Standard heating load per unit area

4.3 Maximum power rating per unit area

4.4 Maximum surface temperature

4.5 Maximum floor surface temperature for underfloor storage heating

4.6 Room air temperature

4.7 Internal surface temperatures on the surrounding surfaces of the room

4.8 Thermal pre-conditioning of the room to be tested

4.9 Floor temperature in the case of continuous local hot spots

4.10 Floor temperature of underfloor storage heating through failure of a switching, controlling or regulation apparatus

4.11 Floor temperature of controlled underfloor heating and underfloor direct heating through failure of a switching, controlling or regulation apparatus

4.12 Regulation of room temperature using peripheral areas for underfloor storage heating

4.13 Regulation of room temperature using controlled underfloor heating and underfloor direct heating

4.14 Regulation of room temperature using underfloor warming

4.15 Relationship of coefficients of heat transfer

4.16 Insulating layers

4.17 Edging insulation strips

4.18 Damp-proofing

4.19 Electrical auxiliary heating

4.20 Load distribution layer in electrical underfloor heating

4.21 Bedding in or under heating screed or directly below floor covering

4.22 Dry laying of electrical heating elements

4.23 Heating element

4.24 Heating cable and laminar heating element

4.24.1 Heating cable for bedding in or under screeding or directly below floor covering

4.24.2 Heating cable for dry Laying

4.24.3 Laminar heating elements for installation below or in screeding

4.25 Characteristics of heating cables

4.26 Characteristics of laminar heating elements

4.27 Cold tails

4.28 Point of connection

4.29 Bending radius of the heating cable

4.30 Heating element labelling

4.31 Pulsation factor

4.32 Installation of heating elements for underfloor direct heating

4.33 Adhesive and fixing material

4.34 Permanent installation areas

4.35 Pre-heating of screeding

4.36 Floor coverings

4.37 Control and regulation equipment

4.38 Control and regulation equipment for underfloor storage heating

4.39 Control and regulation equipment for controlled underfloor heating and underfloor direct heating

4.40 Floor temperature measurement

4.41 Auxiliary supply period

4.42 Period of room use

4.43 Insulation and dielectric resistance of the heating element

4.44 Instructions for construction workers

4.44.1 Protective Measures when Pouring Flooring Screed

4.44.2 Pouring the Screed

4.45 Data for owner and user of the building

4.46 Report of testing

Annex A (informative) Sizing Procedure — Range of application and purpose

Annex B (informative) Sizing procedure — Examples of sizing procedure of an underfloor storage heating system – Example for a living area

Annex C (informative) Sizing procedure — Example of sizing procedure of an underfloor direct heating system – Example for a living area

Annex D (normative) Performance test according to Commission Regulation (EU) 2015/1188

Annex E (normative) Climatic test room

Annex ZZ (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) 2015/1188 aimed to be covered

Bibliography