ДСТУ EN ISO 15551-1:2022 Нефтяная и газовая промышленность. Буровое и производственное оборудование Часть 1. Системы электрических погружных насосов для искусственного подъема (EN ISO 15551-1:2015, IDT; ISO 1...

ДСТУ EN ISO 15551-1:2022
(EN ISO 15551-1:2015, IDT; ISO 15551-1:2015, IDT)

Нафтова та газова промисловість. Бурове та виробниче обладнання. Частина 1.
Системи електричних занурювальних насосів для штучного підймання

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and abbreviated terms

5 Functional specification

5.1 General

5.2 Component type

5.3 Functional requirements

5.3.1 General

5.3.2 Application parameters

5.3.3 Environmental compatibility

5.3.4 Compatibility with related well equipment and services

5.4 User/purchaser selections

5.4.1 General

5.4.2 Design validation

5.4.3 Component functional evaluation

5.4.4 Quality grades

5.4.5 Shipping, handling, and storage

5.4.6 Additional documentation or requirements

6 Technical specification

6.1 General

6.2 Design criteria

6.2.1 General

6.2.2 Design documentation

6.2.3 Materials

6.2.4 Dimensional information

6.2.5 Component and assembled system design verification

6.2.6 Component design validation

6.2.7 Component functional evaluation requirements

6.2.8 Assembled system functional evaluation

6.2.9 Design changes

6.3 Technical specification — All components

6.3.1 Technical characteristics

6.3.2 Performance rating

6.4 Technical specification — Bolt-on discharge

6.4.1 General

6.4.2 Technical characteristics for the discharge

6.4.3 Performance ratings

6.4.4 Scaling of design validation

6.5 Technical specification — Pump and gas handler

6.5.1 General

6.5.2 Technical characteristics for the pump and gas handler

6.5.3 Performance ratings

6.5.4 Scaling of design validation

6.6 Technical specification — Bolt-on intake

6.6.1 General

6.6.2 Technical characteristics for the intake

6.6.3 Performance ratings

6.6.4 Scaling of design validation

6.7 Technical specification — Mechanical gas separators

6.7.1 General

6.7.2 Technical characteristics

6.7.3 Performance ratings

6.7.4 Scaling of design validation

6.8 Technical specification — Seal chamber sections

6.8.1 General

6.8.2 Technical characteristics

6.8.3 Performance ratings

6.8.4 Scaling of design validation

6.8.5 Horsepower requirement

6.9 Technical specification — Motors

6.9.1 General

6.9.2 Technical characteristics

6.9.3 Performance ratings

6.9.4 Scaling of design validation

6.10 Technical specifications — Power and motor lead extension cable

6.10.1 General

6.10.2 Technical characteristics

6.10.3 Performance ratings

6.10.4 Scaling of design validation

6.11 Technical specifications — Pothead

6.11.1 General

6.11.2 Technical characteristics

6.11.3 Performance ratings

6.11.4 Scaling of design validation

6.12 Assembled ESP system

6.12.1 General

6.12.2 Technical characteristics

6.12.3 System capabilities

7 Supplier/manufacturer requirements

7.1 General

7.2 Documentation and data control

7.2.1 General

7.2.2 Delivery documentation

7.2.3 Operator's manual

7.2.4 Certificate of compliance

7.2.5 Component data sheet

7.3 Component identification

7.3.1 Permanent identification

7.3.2 Semi-permanent identification

7.4 Quality

7.4.1 General

7.4.2 Quality grade requirements

7.5 Raw materials

7.6 Additional processes applied to components

7.6.1 Documentation

7.6.2 Coatings and surface treatments

7.6.3 Welding

7.6.4 Heat treating

7.7 Traceability

7.8 Calibration systems

7.9 Examination and inspection

7.9.1 General

7.9.2 Weld

7.9.3 Component and subcomponent dimensional inspection

7.9.4 Construction features

7.10 Manufacturing non-conformance

7.11 Component functional testing

8 Repair/redress

9 Shipping, handling, and storage

9.1 General

9.2 Storage

Annex A (normative) Design validation performance rating requirements by component

Annex B (normative) Requirements for determining performance ratings as an assembled system

Annex C (normative) Functional evaluation: single component

Annex D (normative) Cable reference information

Annex E (informative) Functional evaluation guideline — Assembled ESP system

Annex F (informative) Establishing recommended operating range (ROR) of ESP system

Annex G (informative) Example user/purchaser ESP functional specification form

Annex H (informative) Considerations for use of 3-phase low and medium voltage adjustable speed drives for ESP applications

Annex I (informative) Analysis after ESP use

Annex J (informative) Downhole monitoring of ESP assembly

Annex K (informative) Information on permanent magnet motors for ESP applications

Bibliography