ДСТУ EN 14351-1:2022 Окна и двери. Стандарт на продукцию, эксплуатационные характеристики. Часть 1. Окна и наружные входные дверные проемы (EN 14351-1:2006+A2:2016, IDT)

ДСТУ EN 14351-1:2022
(EN 14351-1:2006+A2:2016, IDT)

Вікна та двері. Стандарт на продукцію, експлуатаційні характеристики.
Частина 1. Вікна та зовнішні вхідні дверні отвори

 
   
 
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

Introduction

1 Scope

2 Normative references

2.1 Classification standards

2.2 Test and calculation standards

2.3 Other standards

3 Terms and definitions

4 Performance characteristics and special requirements

4.1 General

4.2 Resistance to wind load

4.3 Resistance to snow and permanent load

4.4 Fire characteristics

4.5 Watertightness

4.6 Dangerous substances

4.7 Impact resistance

4.8 Load-bearing capacity of safety devices

4.9 Height and width of doorsets and French windows

4.10 Ability to release

4.11 Acoustic performance

4.12 Thermal transmittance

4.13 Radiation properties

4.14 Air permeability

4.15 Durability

4.16 Operating forces

4.17 Mechanical strength

4.18 Ventilation

4.19 Bullet resistance

4.20 Explosion resistance

4.21 Resistance to repeated opening and closing

4.22 Behaviour between different climates

4.23 Burglar resistance

4.24 Special requirements

5 Classification and designation

6 Handling, installation, maintenance and care

7 Evaluation of conformity

7.1 General

7.2 Initial Type Testing (ITT)

7.3 Factory Production Control (FPC)

7.4 Initial inspection of factory and FPC

7.5 Continuous surveillance, assessment and approval of FPC

7.6 Testing of samples taken at the factory in accordance with a prescribed plan

8 Labelling and marking

Annex A (informative) Interdependence between characteristics and components

Annex B (normative) Determination of sound insulation of windows

Annex C (informative) Standards and draft standards on glass

Annex D (informative) Examples of performance and requirement profiles of a roof window

Annex E (normative) Determination of characteristics

Annex F (informative) Optional selection of representative test specimens for windows

Annex G (informative) Examples of test sequences for optional combined determination of characteristics for windows

Annex H (normative) Selection, preparation, mounting and fixing of test specimen for testing roof windows in accordance with EN 13823 and EN ISO 11925-2 and field of direct application

Annex I (normative) Classification of air permeability of products with described product characteristics

Annex J (normative) Thermal transmittance for windows with bars

Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Product Directive

Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC

Annex ZC (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/95/EC

Annex ZD (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC

Bibliography