ДСТУ EN 415-3:2022 Безопасность упаковочных машин. Часть 3. Машины для формовки, наполнения и запечатывания. Машины для наполнения и уплотнения (EN 415-3:2021, IDT)

ДСТУ EN 415-3:2022
(EN 415-3:2021, IDT)

Безпечність пакувальних машин. Частина 3. Машини для формування, наповнення та запечатування. Машини для наповнення та ущільнення

 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

3.1 Definitions of terms

3.2 Definitions of machines covered by this document

3.3 Definitions of machines which have similar hazards to those machines covered by this document

4 Safety requirements

4.1 General requirements

4.2 Safety requirements for a flow-wrapping machine

4.3 Safety requirements for a vertical form, fill and seal machine

4.4 Safety requirements for a horizontal sachet form, fill and seal machine

4.5 Safety requirements for a thermoform, fill and seal machine

4.6 Safety requirements for a tubular bag form, fill and seal machine

4.7 Safety requirements for a mandrel form, fill and seal machine

4.0 Safety requirements for a pre-made bag fill and close machine

4.9 Safety requirements for a cup or tub fill and seal machine

4.10 Safely requirements for a sack fill and seal machine

4.11 Safety requirements for an auger filler

4.12 Safety requirements for a volumetric cup filler

4.13 Safety requirements for a nett weigher

4.14 Safety requirements for a multi-head weigher

5 Verification of safety requirements

5.1 General

5.2 Visual inspections with the machine stopped

5.3 Measurements with the machine stopped

5.4 Visual inspections with the machine running

5.5 Measurements or tests with the machine running

5.6 Verification procedures

6 Information

6.1 General

6.2 Marking

6.3 Warning of residual risks

6.4 Instructions

Annex A (infortnative) List of significant hazards

Annex В (normative) Noise test code

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of ED Directive 2006/42/EC aimed to be covered

Bibliography