ДСТУ EN 13373:2022 Методы испытания природного камня. Определение геометрических характеристик изделий (EN 13373:2020, IDT)

ДСТУ EN 13373:2022
(EN 13373:2020, IDT)

Методи випробування природного каменю. Визначення геометричних характеристик виробів

 
   
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

1 Scope

2 Normative references

3 Terms and definitions

4 Measurement of the dimensions of squared rough blocks

4.1 Measurement of the gross dimensions of squared rough blocks

4.1.1 Principle

4.1.2 Apparatus

4.1.3 Measurement procedure

4.1.4 Expression of the results

4.2 Measurement of net dimensions of rough blocks

4.2.1 Principle

4.2.2 Apparatus

4.2.3 Measurement procedure

4.2.4 Expression of the results

5 Measurement of the dimensions of rough slabs

5.1 Measurement of the gross in-plane dimensions of rough slabs

5.1.1 Principle

5.1.2 Apparatus

5.1.3 Measurement procedure

5.1.4 Expression of the results

5.2 Measurement of the net in-plane dimensions of rough slabs

5.2.1 Principle

5.2.2 Apparatus

5.2.3 Measurement procedure

5.2.4 Expression of the results

5.3 Measurement of the thickness of a rough slab

5.4 Measurement of the flatness of a rough slab

6 Measurement of the dimensions and measurement of other geometric characteristics of finished products with sawn edges

6.1 Principle

6.2 Apparatus

6.3 Measurement of in-plane dimensions of finished products with sawn edges

6.3.1 Measurement procedure

6.3.2 Expression of the results

6.4 Measurement of the thickness and surface irregularities of finished products with sawn edges

6.4.1 Measurement of the rough thickness

6.4.2 Expression of the results

6.4.3 Measurement of surface irregularities

6.4.4 Expression of results

6.4.5 Measurement of the nominal thickness

6.5 Measurement of flatness

6.5.1 Measurement of the flatness for a regular surface finish

6.5.2 Measurement of the flatness for an irregular surface finish

6.6 Measurement of the straightness of arrises

6.6.1 Principle

6.6.2 Apparatus

6.6.3 Measurement procedure

6.6.4 Expression of the results

6.7 Measurement of the squareness of visible faces

6.7.1 Principle

6.7.2 Angular measurement

6.7.3 Measurement in percentage

6.8 Measurement of the squareness of edges

6.8.1 Principle

6.8.2 Apparatus

6.8.3 Measurement procedure

6.8.4 Expression of the results

6.9 Measurement of the shape of non-rectangular elements

6.9.1 Principle

6.9.2 Apparatus

6.9.3 Measurement procedure

7 Measurement of the dimensions and other geometric characteristics of finished products with cleft / riven / hewn edges

7.1 Measurement of dimensions

7.2 Measurement of thickness and surface irregularities

7.3 Measurement of undercut and overcut

7.3.1 General

7.3.2 Apparatus

7.3.3 Measurement procedure

7.3.4 Expression of the results

7.4 Measurement of the flatness

7.5 Measurement of the straightness

7.6 Measurement of the squareness of seen face

8 Measurement of the shape of non-rectangular elements

9 Measurement of the geometrical characteristics of fixing holes of slabs for cladding

9.1 Principle

9.2 Depth of the hole

9.2.1 Apparatus

9.2.2 Measurement procedure

9.2.3 Expression of the results

9.3 Position of the hole

9.3.1 Apparatus

9.3.2 Measurement procedure

9.3.3 Expression of the results

9.4 Diameter of the hole

9.4.1 Apparatus

9.4.2 Measurement procedure

9.4.3 Expression of the results

9.5 Inclination of the hole

9.5.1 Apparatus

9.5.2 Measurement procedure

9.5.3 Expression of the results

10 Test report

Bibliography