ДСТУ EN 168:2017 Средства индивидуальной защиты глаз. Методы испытания неоптические (EN 168:2001, IDT)

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(   
(ДП «УкрНДНЦ»))

Наказ від 22.12.2017 № 448

EN 168:2001

Personal eye-protection —
Non-optical test methods

прийнято як національний стандарт
методом «підтвердження» за позначенням
 

ДСТУ EN 168:2017
(EN 168:2001, IDТ)

Засоби індивідуального захисту очей.
Методи випробування неоптичні

З наданням чинності від 2018-02-01

Contents

Foreword

1 Scope

2 Normative references

3 Test for increased robustness

3.1 Unmounted oculars

3.1.1 Apparatus

3.1.2 Procedure

3.2 Complete eye-protectors and frames

3.2.1 Apparatus

3.2.2 Procedure

3.2.3 Points of impact

4 Test for minimum robustness of oculars with filtering effect and cover plates

4.1 Apparatus

4.1.1 Loading device

4.1.2 Specimen support

4.2 Procedure

5 Test for stability at elevated temperature

5.1 Apparatus

5.2 Procedure

6 Test for resistance to ultraviolet radiation

6.1 Apparatus

6.2 Procedure

7 Test for resistance to ignition

7.1 Apparatus

7.2 Procedure

8 Test for resistance to corrosion

9 Test for resistance to high-speed particles and resistance to high speed particles at extremes of temperature

9.1 Apparatus

9.1.1 Head-form

9.1.2 Propulsion equipment

9.2 Procedure

9.2.1 Resistance to high speed particles

9.2.2 Resistance to high speed particles at extremes of temperature

10 Test for protection against molten metals

10.1 Test for non-adherence of molten metals

10.1.1 Principle

10.1.2 Apparatus

10.1.3 Procedure

10.2 Test for area of coverage of face shields

10.2.1 Principle

10.2.2 Apparatus

10.2.3 Procedure

10.2.4 Evaluation

11 Test for resistance to penetration by hot solids

11.1 Apparatus

11.2 Procedure

12 Test for protection against droplets and liquid splashes

12.1 Test for protection against droplets (for goggle type eye-protectors)

12.1.1 Apparatus

12.1.2 Procedure

12.1.3 Evaluation

12.2 Test for protection against liquid splashes (for face-shields)

13 Test for protection against large dust particles

13.1 Apparatus

13.2 Procedure

13.3 Evaluation

14 Test for protection against gases and fine dust particles

14.1 Apparatus

14.2 Procedure

14.3 Evaluation

15 Test for resistance to surface damage by fine particles

15.1 Apparatus

15.1.1 Falling sand apparatus

15.1.2 Sand

15.1.3 Measuring apparatus

15.1.4 Reference samples

15.2 Samples

15.3 Procedure

15.4 Evaluation

16 Test for resistance to fogging of oculars

16.1 Apparatus

16.2 Samples

16.3 Procedure and evaluation

17 Head-form

18 Assessment of Field of Vision

19 Assessment of lateral protection

19.1 Apparatus

19.2 Procedure

19.3 Evaluation

Annex A (informative) Uncertainty of measurement and results interpretation

Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives